X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=autogen.sh;h=f8b273848c1df8d5f79b35bec9b4e103e2650e11;hb=3e03746915e222d17962f84b8136ca96d5fbf7e4;hp=70c3d527c2a29a8b2dad0fa5f2816c39cb0c0572;hpb=1fd370b401462966e9eb15f35465283dc58a9b3b;p=platform%2Fupstream%2Fflac.git

diff --git a/autogen.sh b/autogen.sh
index 70c3d52..f8b2738 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,148 +1,44 @@
-#!/bin/sh
+#!/bin/bash
 # Run this to set up the build system: configure, makefiles, etc.
-# (based on the version in enlightenment's cvs)
+# We trust that the user has a recent enough autoconf & automake setup
+# (not older than a few years...)
 
-# Some notes:
-#
-# You may need to specify -I /SOME_PATH/share/aclocal in ACLOCAL_FLAGS
-# if any packages FLAC relies on (autotools, libogg, libiconv) are
-# installed in non-standard places.
-#
-# If you don't have XMMS installed at all, you should comment out
-# AM_PATH_XMMS in configure.in.
-#
-# FLAC uses iconv but not gettext.  iconv requires config.rpath which
-# is supplied by gettext, which is copied in by gettextize.  But we
-# can't run gettextize since we do not fulfill all it's requirements
-# (because we don't use it).  So you may have to:
-#
-#   cp /usr/share/gettext/config.rpath .
-#
-# before running autogen.sh
-#
-# Also watchout, if you replace ltmain.sh, there is a bug in some
-# versions of libtool (or maybe autoconf) on some platforms where the
-# configure-generated libtool does not have $SED defined.  See also:
-#
-#   http://lists.gnu.org/archive/html/libtool/2003-11/msg00131.html
+test_program_errors=0
 
-package="flac"
+function test_program {
+	if ! command -v $1 >/dev/null 2>&1 ; then
+		echo "Missing program '$1'."
+		test_program_errors=1
+		fi
+}
 
-olddir=`pwd`
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
+for prog in autoconf automake libtool pkg-config ; do
+	test_program $prog
+	done
 
-cd "$srcdir"
-DIE=0
+if test $(uname -s) != "Darwin" ; then
+	test_program gettext
+	fi
 
-ACLOCAL_FLAGS="-I m4 $ACLOCAL_FLAGS"
+test $test_program_errors -ne 1 || exit 1
 
-echo "checking for autoconf... "
-(autoconf --version) < /dev/null > /dev/null 2>&1 || {
-        echo
-        echo "You must have autoconf installed to compile $package."
-        echo "Download the appropriate package for your distribution,"
-        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
-        DIE=1
-}
+#-------------------------------------------------------------------------------
 
-VERSIONGREP="sed -e s/.*[^0-9\.]\([0-9]\.[0-9]\).*/\1/"
-VERSIONMKINT="sed -e s/[^0-9]//"
-                                                                                
-# do we need automake?
-if test -r Makefile.am; then
-  AM_OPTIONS=`fgrep AUTOMAKE_OPTIONS Makefile.am`
-  AM_NEEDED=`echo $AM_OPTIONS | $VERSIONGREP`
-  if test x"$AM_NEEDED" = "x$AM_OPTIONS"; then
-    AM_NEEDED=""
-  fi
-  if test -z $AM_NEEDED; then
-    echo -n "checking for automake... "
-    AUTOMAKE=automake
-    ACLOCAL=aclocal
-    if ($AUTOMAKE --version < /dev/null > /dev/null 2>&1); then
-      echo "yes"
-    else
-      echo "no"
-      AUTOMAKE=
-    fi
-  else
-    echo -n "checking for automake $AM_NEEDED or later... "
-    for am in automake-$AM_NEEDED automake$AM_NEEDED \
-	automake automake-1.7 automake-1.8 automake-1.9; do
-      ($am --version < /dev/null > /dev/null 2>&1) || continue
-      ver=`$am --version < /dev/null | head -n 1 | $VERSIONGREP | $VERSIONMKINT`
-      verneeded=`echo $AM_NEEDED | $VERSIONMKINT`
-      if test $ver -ge $verneeded; then
-        AUTOMAKE=$am
-        echo $AUTOMAKE
-        break
-      fi
-    done
-    test -z $AUTOMAKE &&  echo "no"
-    echo -n "checking for aclocal $AM_NEEDED or later... "
-    for ac in aclocal-$AM_NEEDED aclocal$AM_NEEDED \
-	aclocal aclocal-1.7 aclocal-1.8 aclocal-1.9; do
-      ($ac --version < /dev/null > /dev/null 2>&1) || continue
-      ver=`$ac --version < /dev/null | head -n 1 | $VERSIONGREP | $VERSIONMKINT`
-      verneeded=`echo $AM_NEEDED | $VERSIONMKINT`
-      if test $ver -ge $verneeded; then
-        ACLOCAL=$ac
-        echo $ACLOCAL
-        break
-      fi
-    done
-    test -z $ACLOCAL && echo "no"
-  fi
-  test -z $AUTOMAKE || test -z $ACLOCAL && {
-        echo
-        echo "You must have automake installed to compile $package."
-        echo "Download the appropriate package for your distribution,"
-        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
-        exit 1
-  }
-fi
+set -e
 
-echo -n "checking for libtool... "
-for LIBTOOLIZE in libtoolize glibtoolize nope; do
-  ($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 && break
-done
-if test x$LIBTOOLIZE = xnope; then
-  echo "nope."
-  LIBTOOLIZE=libtoolize
-else
-  echo $LIBTOOLIZE
-fi
-($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 || {
-	echo
-	echo "You must have libtool installed to compile $package."
-	echo "Download the appropriate package for your system,"
-	echo "or get the source from one of the GNU ftp sites"
-	echo "listed in http://www.gnu.org/order/ftp.html"
-	DIE=1
-}
+if test $(uname -s) = "OpenBSD" ; then
+	# OpenBSD needs these environment variables set.
+	AUTOCONF_VERSION=2.69
+	AUTOMAKE_VERSION=1.11
+	export AUTOCONF_VERSION
+	export AUTOMAKE_VERSION
+	fi
 
-if test "$DIE" -eq 1; then
-        exit 1
-fi
-
-if test -z "$*"; then
-        echo "I am going to run ./configure with no arguments - if you wish "
-        echo "to pass any to it, please specify them on the $0 command line."
-fi
-
-echo "Generating configuration files for $package, please wait...."
+srcdir=`dirname $0`
+test -n "$srcdir" && cd "$srcdir"
 
-echo "  $ACLOCAL $ACLOCAL_FLAGS"
-$ACLOCAL $ACLOCAL_FLAGS || exit 1
-echo "  $LIBTOOLIZE --automake"
-$LIBTOOLIZE --automake || exit 1
-echo "  autoheader"
-autoheader || exit 1
-echo "  $AUTOMAKE --add-missing $AUTOMAKE_FLAGS"
-$AUTOMAKE --add-missing $AUTOMAKE_FLAGS || exit 1
-echo "  autoconf"
-autoconf || exit 1
+echo "Updating build configuration files for FLAC, please wait...."
 
-cd $olddir
-$srcdir/configure --enable-maintainer-mode "$@" && echo
+touch config.rpath
+autoreconf -isf
+#./configure "$@" && echo