X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Fx86%2Fdts%2Fconga-qeval20-qa3-e3845.dts;h=c3d15143cf45eea777799299f4730411d4b7dd25;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=fba089d6668a98eabdb02565b498860168850a12;hpb=6beacfcff81bdc04c10a440971b0fb683ee57534;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index fba089d..c3d1514 100644
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -46,6 +46,17 @@
 			pad-offset = <0x3a0>;
 			mode-func = <1>;
 		};
+
+		/* Add SMBus PAD configuration */
+		smbus_clk@0 {
+			pad-offset = <0x580>;
+			mode-func = <1>;
+		};
+
+		smbus_data@0 {
+			pad-offset = <0x5a0>;
+			mode-func = <1>;
+		};
 	};
 
 	chosen {
@@ -188,6 +199,7 @@
 				u-boot,dm-pre-reloc;
 				reg = <0 0x20>;
 				bank-name = "A";
+				use-lvl-write-cache;
 			};
 
 			gpiob {
@@ -195,6 +207,7 @@
 				u-boot,dm-pre-reloc;
 				reg = <0x20 0x20>;
 				bank-name = "B";
+				use-lvl-write-cache;
 			};
 
 			gpioc {
@@ -202,6 +215,7 @@
 				u-boot,dm-pre-reloc;
 				reg = <0x40 0x20>;
 				bank-name = "C";
+				use-lvl-write-cache;
 			};
 
 			gpiod {
@@ -209,6 +223,7 @@
 				u-boot,dm-pre-reloc;
 				reg = <0x60 0x20>;
 				bank-name = "D";
+				use-lvl-write-cache;
 			};
 
 			gpioe {
@@ -216,6 +231,7 @@
 				u-boot,dm-pre-reloc;
 				reg = <0x80 0x20>;
 				bank-name = "E";
+				use-lvl-write-cache;
 			};
 
 			gpiof {
@@ -223,55 +239,52 @@
 				u-boot,dm-pre-reloc;
 				reg = <0xA0 0x20>;
 				bank-name = "F";
+				use-lvl-write-cache;
 			};
 		};
 	};
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <1>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+#ifdef CONFIG_USB_XHCI_HCD
+		fsp,enable-xhci;
+#endif
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
-		fsp,enable-i2c0;
-		fsp,enable-i2c1;
-		fsp,enable-i2c2;
-		fsp,enable-i2c3;
-		fsp,enable-i2c4;
-		fsp,enable-i2c5;
-		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
 		fsp,enable-memory-down;
 		fsp,memory-down-params {
 			compatible = "intel,baytrail-fsp-mdp";
-			fsp,dram-speed = <2>;		/* 2=1333MHz */
-			fsp,dram-type = <1>;		/* 1=DDR3L */
+			fsp,dram-speed = <DRAM_SPEED_1333MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
 			fsp,dimm-0-enable;
 			fsp,dimm-1-enable;
-			fsp,dimm-width = <1>;		/* 1=x16, 2=x32 */
-			fsp,dimm-density = <2>;		/* 2=4Gbit */
-			fsp,dimm-bus-width = <3>;	/* 3=64bits */
-			fsp,dimm-sides = <0>;		/* 0=1 ranks -> 0x2b */
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
 
 			/* These following values might need a re-visit */
 			fsp,dimm-tcl = <8>;