X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Friscv%2Fboot%2Fdts%2Fstarfive%2Fjh7110-common.dtsi;h=8623c8a97a4fe6969a9ca915a4feb4301c47e6c5;hb=61474d9f64dc5db0edef4e005c1f8c0810b21240;hp=50d926d887ee956dfd6da6db3d891aba7332ebbe;hpb=38029593be5b0ed430c7194b6b8b1227b2e1206e;p=platform%2Fkernel%2Flinux-starfive.git

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
old mode 100644
new mode 100755
index 50d926d..8623c8a
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -183,6 +183,10 @@
 		};
 	};
 
+	tinker_ft5406: tinker_ft5406@38 {
+		compatible = "tinker_ft5406";
+		reg = <0x38>;
+	};
 };
 
 &i2c3 {
@@ -283,12 +287,8 @@
 		reg = <0x10>;
 		clocks = <&clk_ext_camera>;
 		clock-names = "xclk";
-		//reset-gpio = <&gpio 10 0>;
+		//reset-gpio = <&gpio 18 0>;
 		//DOVDD-supply = <&v2v8>;
-		pinctrl-names = "default", "power_up", "power_down";
-		pinctrl-0 = <&csi_pins_default>;
-		pinctrl-1 = <&csi_pins_pwup>;
-		pinctrl-2 = <&csi_pins_pwdn>;
 		rotation = <0>;
 		orientation = <1>; //CAMERA_ORIENTATION_BACK
 
@@ -390,9 +390,12 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	phy0: ethernet-phy@0 {
-		rxc_dly_en = <0>;
+		rxc_dly_en = <1>;
 		tx_delay_sel_fe = <5>;
-		tx_delay_sel = <11>;
+		tx_delay_sel = <0xb>;
+		tx_inverted_10 = <0x0>;
+		tx_inverted_100 = <0x0>;
+		tx_inverted_1000 = <0x0>;
 	};
 };
 
@@ -586,18 +589,20 @@
 };
 
 &pcie0 {
-	pinctrl-names = "perst-default", "perst-active", "power-active";
+	pinctrl-names = "perst-default", "perst-active", "power-default", "power-active";
 	pinctrl-0 = <&pcie0_perst_default>;
 	pinctrl-1 = <&pcie0_perst_active>;
-	pinctrl-2 = <&pcie0_power_active>;
+	pinctrl-2 = <&pcie0_power_default>;
+	pinctrl-3 = <&pcie0_power_active>;
 	status = "disabled";
 };
 
 &pcie1 {
-	pinctrl-names = "perst-default", "perst-active", "power-active";
+	pinctrl-names = "perst-default", "perst-active", "power-default", "power-active";
 	pinctrl-0 = <&pcie1_perst_default>;
 	pinctrl-1 = <&pcie1_perst_active>;
-	pinctrl-2 = <&pcie1_power_active>;
+	pinctrl-2 = <&pcie1_power_default>;
+	pinctrl-3 = <&pcie1_power_active>;
 	status = "disabled";
 };
 
@@ -705,6 +710,20 @@
 
 &mipi_dsi {
 	status = "okay";
+
+	port {
+		dsi_out_port: endpoint@0 {
+			remote-endpoint = <&panel_dsi_port>;
+		};
+		dsi_in_port: endpoint@1 {
+			remote-endpoint = <&mipi_out>;
+		};
+	};
+
+	mipi_panel: panel@0 {
+		/*compatible = "";*/
+		status = "okay";
+	};
 };
 
 &mipi_dphy {