X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Fstart.S;h=2657982a45b9917a32adcc2a87fb8516a3464000;hb=f9c1456cf632175afb7d6b27f42f1aab8432be0f;hp=878a3d67e8219748af10fed2c69b330f5867acee;hpb=0886eef9ba25b9e8da4bbaefc1a0b6da7a9567dc;p=platform%2Fkernel%2Fu-boot.git diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 878a3d6..2657982 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc. + * Copyright 2004, 2007-2012 Freescale Semiconductor, Inc. * Copyright (C) 2003 Motorola,Inc. * * See file CREDITS for list of people who contributed to this @@ -44,6 +44,15 @@ #undef MSR_KERNEL #define MSR_KERNEL ( MSR_ME ) /* Machine Check */ +#if defined(CONFIG_NAND_SPL) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)) +#define MINIMAL_SPL +#endif + +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#define NOR_BOOT +#endif + /* * Set up GOT: Global Offset Table * @@ -53,7 +62,7 @@ GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) @@ -61,7 +70,7 @@ #endif GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -82,6 +91,77 @@ .globl _start_e500 _start_e500: +/* Enable debug exception */ + li r1,MSR_DE + mtmsr r1 + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510 + mfspr r3,SPRN_SVR + rlwinm r3,r3,0,0xff + li r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV + cmpw r3,r4 + beq 1f + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 + li r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 + cmpw r3,r4 + beq 1f +#endif + + /* Not a supported revision affected by erratum */ + li r27,0 + b 2f + +1: li r27,1 /* Remember for later that we have the erratum */ + /* Erratum says set bits 55:60 to 001001 */ + msync + isync + mfspr r3,SPRN_HDBCR0 + li r4,0x48 + rlwimi r3,r4,0,0x1f8 + mtspr SPRN_HDBCR0,r3 + isync +2: +#endif + +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) + /* ISBC uses L2 as stack. + * Disable L2 cache here so that u-boot can enable it later + * as part of it's normal flow + */ + + /* Check if L2 is enabled */ + mfspr r3, SPRN_L2CSR0 + lis r2, L2CSR0_L2E@h + ori r2, r2, L2CSR0_L2E@l + and. r4, r3, r2 + beq l2_disabled + + mfspr r3, SPRN_L2CSR0 + /* Flush L2 cache */ + lis r2,(L2CSR0_L2FL)@h + ori r2, r2, (L2CSR0_L2FL)@l + or r3, r2, r3 + sync + isync + mtspr SPRN_L2CSR0,r3 + isync +1: + mfspr r3, SPRN_L2CSR0 + and. r1, r3, r2 + bne 1b + + mfspr r3, SPRN_L2CSR0 + lis r2, L2CSR0_L2E@h + ori r2, r2, L2CSR0_L2E@l + andc r4, r3, r2 + sync + isync + mtspr SPRN_L2CSR0,r4 + isync + +l2_disabled: +#endif /* clear registers/arrays not reset by hardware */ @@ -93,88 +173,119 @@ _start_e500: mfspr r1,DBSR mtspr DBSR,r1 /* Clear all valid bits */ - /* - * Enable L1 Caches early - * - */ - -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - li r2,(32 + 0) - mtspr L1CSR2,r2 -#endif - - /* Enable/invalidate the I-Cache */ - lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h - ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l - mtspr SPRN_L1CSR1,r2 -1: - mfspr r3,SPRN_L1CSR1 - and. r1,r3,r2 - bne 1b - lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h - ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l - mtspr SPRN_L1CSR1,r3 + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch isync -2: - mfspr r3,SPRN_L1CSR1 - andi. r1,r3,L1CSR1_ICE@l - beq 2b - - /* Enable/invalidate the D-Cache */ - lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h - ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l - mtspr SPRN_L1CSR0,r2 -1: - mfspr r3,SPRN_L1CSR0 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h - ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l - mtspr SPRN_L1CSR0,r3 + msync + tlbwe isync -2: - mfspr r3,SPRN_L1CSR0 - andi. r1,r3,L1CSR0_DCE@l - beq 2b + .endm + + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb1_entry esel scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb0_entry esel epn wimg scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + isync + msync + tlbwe + isync + .endm +/* Interrupt vectors do not fit in minimal SPL. */ +#if !defined(MINIMAL_SPL) /* Setup interrupt vectors */ lis r1,CONFIG_SYS_MONITOR_BASE@h mtspr IVPR,r1 - li r1,0x0100 - mtspr IVOR0,r1 /* 0: Critical input */ - li r1,0x0200 - mtspr IVOR1,r1 /* 1: Machine check */ - li r1,0x0300 - mtspr IVOR2,r1 /* 2: Data storage */ - li r1,0x0400 - mtspr IVOR3,r1 /* 3: Instruction storage */ - li r1,0x0500 - mtspr IVOR4,r1 /* 4: External interrupt */ - li r1,0x0600 - mtspr IVOR5,r1 /* 5: Alignment */ - li r1,0x0700 - mtspr IVOR6,r1 /* 6: Program check */ - li r1,0x0800 - mtspr IVOR7,r1 /* 7: floating point unavailable */ - li r1,0x0900 - mtspr IVOR8,r1 /* 8: System call */ + lis r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@h + ori r3,r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@l + + addi r4,r3,CriticalInput - _start + _START_OFFSET + mtspr IVOR0,r4 /* 0: Critical input */ + addi r4,r3,MachineCheck - _start + _START_OFFSET + mtspr IVOR1,r4 /* 1: Machine check */ + addi r4,r3,DataStorage - _start + _START_OFFSET + mtspr IVOR2,r4 /* 2: Data storage */ + addi r4,r3,InstStorage - _start + _START_OFFSET + mtspr IVOR3,r4 /* 3: Instruction storage */ + addi r4,r3,ExtInterrupt - _start + _START_OFFSET + mtspr IVOR4,r4 /* 4: External interrupt */ + addi r4,r3,Alignment - _start + _START_OFFSET + mtspr IVOR5,r4 /* 5: Alignment */ + addi r4,r3,ProgramCheck - _start + _START_OFFSET + mtspr IVOR6,r4 /* 6: Program check */ + addi r4,r3,FPUnavailable - _start + _START_OFFSET + mtspr IVOR7,r4 /* 7: floating point unavailable */ + addi r4,r3,SystemCall - _start + _START_OFFSET + mtspr IVOR8,r4 /* 8: System call */ /* 9: Auxiliary processor unavailable(unsupported) */ - li r1,0x0a00 - mtspr IVOR10,r1 /* 10: Decrementer */ - li r1,0x0b00 - mtspr IVOR11,r1 /* 11: Interval timer */ - li r1,0x0c00 - mtspr IVOR12,r1 /* 12: Watchdog timer */ - li r1,0x0d00 - mtspr IVOR13,r1 /* 13: Data TLB error */ - li r1,0x0e00 - mtspr IVOR14,r1 /* 14: Instruction TLB error */ - li r1,0x0f00 - mtspr IVOR15,r1 /* 15: Debug */ + addi r4,r3,Decrementer - _start + _START_OFFSET + mtspr IVOR10,r4 /* 10: Decrementer */ + addi r4,r3,IntervalTimer - _start + _START_OFFSET + mtspr IVOR11,r4 /* 11: Interval timer */ + addi r4,r3,WatchdogTimer - _start + _START_OFFSET + mtspr IVOR12,r4 /* 12: Watchdog timer */ + addi r4,r3,DataTLBError - _start + _START_OFFSET + mtspr IVOR13,r4 /* 13: Data TLB error */ + addi r4,r3,InstructionTLBError - _start + _START_OFFSET + mtspr IVOR14,r4 /* 14: Instruction TLB error */ + addi r4,r3,DebugBreakpoint - _start + _START_OFFSET + mtspr IVOR15,r4 /* 15: Debug */ +#endif /* Clear and set up some registers. */ li r0,0x0000 @@ -214,6 +325,12 @@ _start_e500: mtspr HID1,r0 #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 + mfspr r3,SPRN_HDBCR1 + oris r3,r3,0x0100 + mtspr SPRN_HDBCR1,r3 +#endif + /* Enable Branch Prediction */ #if defined(CONFIG_BTB) lis r0,BUCSR_ENABLE@h @@ -240,27 +357,11 @@ _start_e500: */ /* create a temp mapping TLB0[0] for LBCR */ - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ + 0, r6 /* Set LBCR register */ lis r4,CONFIG_SYS_LBCR_ADDR@h @@ -279,76 +380,713 @@ _start_e500: #endif /* CONFIG_MPC8569 */ - lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l +/* + * Search for the TLB that covers the code we're executing, and shrink it + * so that it covers only this 4K page. That will ensure that any other + * TLB we create won't interfere with it. We assume that the TLB exists, + * which is why we don't check the Valid bit of MAS1. We also assume + * it is in TLB1. + * + * This is necessary, for example, when booting from the on-chip ROM, + * which (oddly) creates a single 4GB TLB that covers CCSR and DDR. + */ + bl nexti /* Find our address */ +nexti: mflr r1 /* R1 = our PC */ + li r2, 0 + mtspr MAS6, r2 /* Assume the current PID and AS are 0 */ + isync + msync + tlbsx 0, r1 /* This must succeed */ -#ifndef CONFIG_SYS_RAMBOOT - /* create a temp mapping in AS=1 to the 4M boot window */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l + mfspr r14, MAS0 /* Save ESEL for later */ + rlwinm r14, r14, 16, 0xfff + + /* Set the size of the TLB to 4KB */ + mfspr r3, MAS1 + li r2, 0xF80 + andc r3, r3, r2 /* Clear the TSIZE bits */ + ori r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l + oris r3, r3, MAS1_IPROT@h + mtspr MAS1, r3 + + /* + * Set the base address of the TLB to our PC. We assume that + * virtual == physical. We also assume that MAS2_EPN == MAS3_RPN. + */ + lis r3, MAS2_EPN@h + ori r3, r3, MAS2_EPN@l /* R3 = MAS2_EPN */ + + and r1, r1, r3 /* Our PC, rounded down to the nearest page */ + + mfspr r2, MAS2 + andc r2, r2, r3 + or r2, r2, r1 +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510 + cmpwi r27,0 + beq 1f + andi. r15, r2, MAS2_I|MAS2_G /* save the old I/G for later */ + rlwinm r2, r2, 0, ~MAS2_I + ori r2, r2, MAS2_G +1: +#endif + mtspr MAS2, r2 /* Set the EPN to our PC base address */ + + mfspr r2, MAS3 + andc r2, r2, r3 + or r2, r2, r1 + mtspr MAS3, r2 /* Set the RPN to our PC base address */ + + isync + msync + tlbwe + +/* + * Clear out any other TLB entries that may exist, to avoid conflicts. + * Our TLB entry is in r14. + */ + li r0, TLBIVAX_ALL | TLBIVAX_TLB0 + tlbivax 0, r0 + tlbsync + + mfspr r4, SPRN_TLB1CFG + rlwinm r4, r4, 0, TLBnCFG_NENTRY_MASK + + li r3, 0 + mtspr MAS1, r3 +1: cmpw r3, r14 + rlwinm r5, r3, 16, MAS0_ESEL_MSK + addi r3, r3, 1 + beq 2f /* skip the entry we're executing from */ - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l + oris r5, r5, MAS0_TLBSEL(1)@h + mtspr MAS0, r5 - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + isync + tlbwe + isync + msync + +2: cmpw r3, r4 + blt 1b + +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + */ + +#ifdef NOR_BOOT +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. + * and this window is outside of 4K boot window. + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * because "nexti" will resize TLB to 4K + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif +#endif + +/* + * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default + * location is not where we want it. This typically happens on a 36-bit + * system, where we want to move CCSR to near the top of 36-bit address space. + * + * To move CCSR, we create two temporary TLBs, one for the old location, and + * another for the new location. On CoreNet systems, we also need to create + * a special, temporary LAW. + * + * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for + * long-term TLBs, so we use TLB0 here. + */ +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) + +#if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW) +#error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined." +#endif + +create_ccsr_new_tlb: /* - * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main - * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. + * Create a TLB for the new location of CCSR. Register R8 is reserved + * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR). + */ + lis r8, CONFIG_SYS_CCSRBAR@h + ori r8, r8, CONFIG_SYS_CCSRBAR@l + lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h + ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + /* + * Create a TLB for the current location of CCSR. Register R9 is reserved + * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). + */ +create_ccsr_old_tlb: + create_tlb0_entry 1, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ + 0, r3 /* The default CCSR address is always a 32-bit number */ + + + /* + * We have a TLB for what we think is the current (old) CCSR. Let's + * verify that, otherwise we won't be able to move it. + * CONFIG_SYS_CCSRBAR_DEFAULT is always a 32-bit number, so we only + * need to compare the lower 32 bits of CCSRBAR on CoreNet systems. + */ +verify_old_ccsr: + lis r0, CONFIG_SYS_CCSRBAR_DEFAULT@h + ori r0, r0, CONFIG_SYS_CCSRBAR_DEFAULT@l +#ifdef CONFIG_FSL_CORENET + lwz r1, 4(r9) /* CCSRBARL */ +#else + lwz r1, 0(r9) /* CCSRBAR, shifted right by 12 */ + slwi r1, r1, 12 +#endif + + cmpl 0, r0, r1 + + /* + * If the value we read from CCSRBARL is not what we expect, then + * enter an infinite loop. This will at least allow a debugger to + * halt execution and examine TLBs, etc. There's no point in going + * on. + */ +infinite_debug_loop: + bne infinite_debug_loop + +#ifdef CONFIG_FSL_CORENET + +#define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) +#define LAW_EN 0x80000000 +#define LAW_SIZE_4K 0xb +#define CCSRBAR_LAWAR (LAW_EN | (0x1e << 20) | LAW_SIZE_4K) +#define CCSRAR_C 0x80000000 /* Commit */ + +create_temp_law: + /* + * On CoreNet systems, we create the temporary LAW using a special LAW + * target ID of 0x1e. LAWBARH is at offset 0xc00 in CCSR. + */ + lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r2, CCSRBAR_LAWAR@h + ori r2, r2, CCSRBAR_LAWAR@l + + stw r0, 0xc00(r9) /* LAWBARH0 */ + stw r1, 0xc04(r9) /* LAWBARL0 */ + sync + stw r2, 0xc08(r9) /* LAWAR0 */ + + /* + * Read back from LAWAR to ensure the update is complete. e500mc + * cores also require an isync. + */ + lwz r0, 0xc08(r9) /* LAWAR0 */ + isync + + /* + * Read the current CCSRBARH and CCSRBARL using load word instructions. + * Follow this with an isync instruction. This forces any outstanding + * accesses to configuration space to completion. + */ +read_old_ccsrbar: + lwz r0, 0(r9) /* CCSRBARH */ + lwz r0, 4(r9) /* CCSRBARL */ + isync + + /* + * Write the new values for CCSRBARH and CCSRBARL to their old + * locations. The CCSRBARH has a shadow register. When the CCSRBARH + * has a new value written it loads a CCSRBARH shadow register. When + * the CCSRBARL is written, the CCSRBARH shadow register contents + * along with the CCSRBARL value are loaded into the CCSRBARH and + * CCSRBARL registers, respectively. Follow this with a sync + * instruction. + */ +write_new_ccsrbar: + lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r2, CCSRAR_C@h + ori r2, r2, CCSRAR_C@l + + stw r0, 0(r9) /* Write to CCSRBARH */ + sync /* Make sure we write to CCSRBARH first */ + stw r1, 4(r9) /* Write to CCSRBARL */ + sync + + /* + * Write a 1 to the commit bit (C) of CCSRAR at the old location. + * Follow this with a sync instruction. + */ + stw r2, 8(r9) + sync + + /* Delete the temporary LAW */ +delete_temp_law: + li r1, 0 + stw r1, 0xc08(r8) + sync + stw r1, 0xc00(r8) + stw r1, 0xc04(r8) + sync + +#else /* #ifdef CONFIG_FSL_CORENET */ + +write_new_ccsrbar: + /* + * Read the current value of CCSRBAR using a load word instruction + * followed by an isync. This forces all accesses to configuration + * space to complete. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l + sync + lwz r0, 0(r9) + isync + +/* CONFIG_SYS_CCSRBAR_PHYS right shifted by 12 */ +#define CCSRBAR_PHYS_RS12 ((CONFIG_SYS_CCSRBAR_PHYS_HIGH << 20) | \ + (CONFIG_SYS_CCSRBAR_PHYS_LOW >> 12)) + + /* Write the new value to CCSRBAR. */ + lis r0, CCSRBAR_PHYS_RS12@h + ori r0, r0, CCSRBAR_PHYS_RS12@l + stw r0, 0(r9) + sync + + /* + * The manual says to perform a load of an address that does not + * access configuration space or the on-chip SRAM using an existing TLB, + * but that doesn't appear to be necessary. We will do the isync, + * though. + */ + isync - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l + /* + * Read the contents of CCSRBAR from its new location, followed by + * another isync. + */ + lwz r0, 0(r8) + isync - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#endif /* #ifdef CONFIG_FSL_CORENET */ + + /* Delete the temporary TLBs */ +delete_temp_tlbs: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 + +#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +create_ccsr_l2_tlb: + /* + * Create a TLB for the MMR location of CCSR + * to access L2CSR0 register + */ + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + +enable_l2_cluster_l2: + /* enable L2 cache */ + lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + li r4, 33 /* stash id */ + stw r4, 4(r3) + lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l + sync + stw r4, 0(r3) /* invalidate L2 */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + bne 1b + lis r4, (L2CSR0_L2E|L2CSR0_L2PE)@h + ori r4, r4, (L2CSR0_L2REP_MODE)@l + sync + stw r4, 0(r3) /* enable L2 */ +delete_ccsr_l2_tlb: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 + /* + * Enable the L1. On e6500, this has to be done + * after the L2 is up. + */ + +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + li r2,(32 + 0) + mtspr L1CSR2,r2 +#endif + + /* Enable/invalidate the I-Cache */ + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 + isync +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b + + /* Enable/invalidate the D-Cache */ + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 + isync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b +#ifdef CONFIG_SYS_FSL_ERRATUM_A004510 +#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) +#define LAW_SIZE_1M 0x13 +#define DCSRBAR_LAWAR (LAW_EN | (0x1d << 20) | LAW_SIZE_1M) + + cmpwi r27,0 + beq 9f + + /* + * Create a TLB entry for CCSR + * + * We're executing out of TLB1 entry in r14, and that's the only + * TLB entry that exists. To allocate some TLB entries for our + * own use, flip a bit high enough that we won't flip it again + * via incrementing. + */ + + xori r8, r14, 32 + lis r0, MAS0_TLBSEL(1)@h + rlwimi r0, r8, 16, MAS0_ESEL_MSK + lis r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@h + ori r1, r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@l + lis r7, CONFIG_SYS_CCSRBAR@h + ori r7, r7, CONFIG_SYS_CCSRBAR@l + ori r2, r7, MAS2_I|MAS2_G + lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h + ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l + lis r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h + ori r4, r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + mtspr MAS0, r0 + mtspr MAS1, r1 + mtspr MAS2, r2 + mtspr MAS3, r3 + mtspr MAS7, r4 + isync + tlbwe isync msync + + /* Map DCSR temporarily to physical address zero */ + li r0, 0 + lis r3, DCSRBAR_LAWAR@h + ori r3, r3, DCSRBAR_LAWAR@l + + stw r0, 0xc00(r7) /* LAWBARH0 */ + stw r0, 0xc04(r7) /* LAWBARL0 */ + sync + stw r3, 0xc08(r7) /* LAWAR0 */ + + /* Read back from LAWAR to ensure the update is complete. */ + lwz r3, 0xc08(r7) /* LAWAR0 */ + isync + + /* Create a TLB entry for DCSR at zero */ + + addi r9, r8, 1 + lis r0, MAS0_TLBSEL(1)@h + rlwimi r0, r9, 16, MAS0_ESEL_MSK + lis r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h + ori r1, r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l + li r6, 0 /* DCSR effective address */ + ori r2, r6, MAS2_I|MAS2_G + li r3, MAS3_SW|MAS3_SR + li r4, 0 + mtspr MAS0, r0 + mtspr MAS1, r1 + mtspr MAS2, r2 + mtspr MAS3, r3 + mtspr MAS7, r4 + isync tlbwe + isync + msync - /* create a temp mapping in AS=1 to the stack */ - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l + /* enable the timebase */ +#define CTBENR 0xe2084 + li r3, 1 + addis r4, r7, CTBENR@ha + stw r3, CTBENR@l(r4) + lwz r3, CTBENR@l(r4) + twi 0,r3,0 + isync - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l + .macro erratum_set_ccsr offset value + addis r3, r7, \offset@ha + lis r4, \value@h + addi r3, r3, \offset@l + ori r4, r4, \value@l + bl erratum_set_value + .endm + + .macro erratum_set_dcsr offset value + addis r3, r6, \offset@ha + lis r4, \value@h + addi r3, r3, \offset@l + ori r4, r4, \value@l + bl erratum_set_value + .endm + + erratum_set_dcsr 0xb0e08 0xe0201800 + erratum_set_dcsr 0xb0e18 0xe0201800 + erratum_set_dcsr 0xb0e38 0xe0400000 + erratum_set_dcsr 0xb0008 0x00900000 + erratum_set_dcsr 0xb0e40 0xe00a0000 + erratum_set_ccsr 0x18600 CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY + erratum_set_ccsr 0x10f00 0x415e5000 + erratum_set_ccsr 0x11f00 0x415e5000 + + /* Make temp mapping uncacheable again, if it was initially */ + bl 2f +2: mflr r3 + tlbsx 0, r3 + mfspr r4, MAS2 + rlwimi r4, r15, 0, MAS2_I + rlwimi r4, r15, 0, MAS2_G + mtspr MAS2, r4 + isync + tlbwe + isync + msync - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l + /* Clear the cache */ + lis r3,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r3,r3,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + sync + isync + mtspr SPRN_L1CSR1,r3 + isync +2: sync + mfspr r4,SPRN_L1CSR1 + and. r4,r4,r3 + bne 2b -#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ - defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH - mtspr MAS7,r10 -#else - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l -#endif + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + sync + isync + mtspr SPRN_L1CSR1,r3 + isync +2: sync + mfspr r4,SPRN_L1CSR1 + and. r4,r4,r3 + beq 2b - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 + /* Remove temporary mappings */ + lis r0, MAS0_TLBSEL(1)@h + rlwimi r0, r9, 16, MAS0_ESEL_MSK + li r3, 0 + mtspr MAS0, r0 + mtspr MAS1, r3 + isync + tlbwe isync msync + + li r3, 0 + stw r3, 0xc08(r7) /* LAWAR0 */ + lwz r3, 0xc08(r7) + isync + + lis r0, MAS0_TLBSEL(1)@h + rlwimi r0, r8, 16, MAS0_ESEL_MSK + li r3, 0 + mtspr MAS0, r0 + mtspr MAS1, r3 + isync tlbwe + isync + msync + + b 9f - lis r6,MSR_IS|MSR_DS@h - ori r6,r6,MSR_IS|MSR_DS@l + /* r3 = addr, r4 = value, clobbers r5, r11, r12 */ +erratum_set_value: + /* Lock two cache lines into I-Cache */ + sync + mfspr r11, SPRN_L1CSR1 + rlwinm r11, r11, 0, ~L1CSR1_ICUL + sync + isync + mtspr SPRN_L1CSR1, r11 + isync + + mflr r12 + bl 5f +5: mflr r5 + addi r5, r5, 2f - 5b + icbtls 0, 0, r5 + addi r5, r5, 64 + + sync + mfspr r11, SPRN_L1CSR1 +3: andi. r11, r11, L1CSR1_ICUL + bne 3b + + icbtls 0, 0, r5 + addi r5, r5, 64 + + sync + mfspr r11, SPRN_L1CSR1 +3: andi. r11, r11, L1CSR1_ICUL + bne 3b + + b 2f + .align 6 + /* Inside a locked cacheline, wait a while, write, then wait a while */ +2: sync + + mfspr r5, SPRN_TBRL + addis r11, r5, 0x10000@h /* wait 65536 timebase ticks */ +4: mfspr r5, SPRN_TBRL + subf. r5, r5, r11 + bgt 4b + + stw r4, 0(r3) + + mfspr r5, SPRN_TBRL + addis r11, r5, 0x10000@h /* wait 65536 timebase ticks */ +4: mfspr r5, SPRN_TBRL + subf. r5, r5, r11 + bgt 4b + + sync + + /* + * Fill out the rest of this cache line and the next with nops, + * to ensure that nothing outside the locked area will be + * fetched due to a branch. + */ + .rept 19 + nop + .endr + + sync + mfspr r11, SPRN_L1CSR1 + rlwinm r11, r11, 0, ~L1CSR1_ICUL + sync + isync + mtspr SPRN_L1CSR1, r11 + isync + + mtlr r12 + blr + +9: +#endif + +create_init_ram_area: + lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h + ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l + +#ifdef NOR_BOOT + /* create a temp mapping in AS=1 to the 4M boot window */ + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + /* create a temp mapping in AS = 1 for Flash mapping + * created by PBL for ISBC code + */ + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#else + /* + * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main + * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. + */ + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif + + /* create a temp mapping in AS=1 to the stack */ +#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ + defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + +#else + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif + + lis r6,MSR_IS|MSR_DS|MSR_DE@h + ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h ori r7,r7,switch_as@l @@ -376,7 +1114,8 @@ switch_as: bdnz 1b /* Jump out the last 4K page and continue to 'normal' start */ -#ifdef CONFIG_SYS_RAMBOOT +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) + /* We assume that we're already running at the address we're linked at */ b _start_cont #else /* Calculate absolute address in FLASH and jump there */ @@ -400,18 +1139,12 @@ version_string: .globl _start_cont _start_cont: /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ - lis r1,CONFIG_SYS_INIT_RAM_ADDR@h - ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l - + lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h + ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ li r0,0 - stwu r0,-4(r1) - stwu r0,-4(r1) /* Terminate call chain */ - - stwu r1,-8(r1) /* Save back chain and move SP */ - lis r0,RESET_VECTOR@h /* Address of reset vector */ - ori r0,r0,RESET_VECTOR@l - stwu r1,-8(r1) /* Save back chain and move SP */ - stw r0,+12(r1) /* Save return addr (underflow vect) */ + stw r0,0(r3) /* Terminate Back Chain */ + stw r0,+4(r3) /* NULL return address. */ + mr r1,r3 /* Transfer to SP(r1) */ GET_GOT bl cpu_init_early_f @@ -428,7 +1161,7 @@ _start_cont: /* NOTREACHED - board_init_f() does not return */ -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL . = EXC_OFF_SYS_RESET .globl _start_of_vectors _start_of_vectors: @@ -872,7 +1605,7 @@ in32: in32r: lwbrx r3,r0,r3 blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */ /*------------------------------------------------------------------------------*/ @@ -986,17 +1719,24 @@ relocate_code: 7: sync /* Wait for all icbi to complete on bus */ isync - /* - * Re-point the IVPR at RAM - */ - mtspr IVPR,r10 - /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ addi r0,r10,in_ram - _start + _START_OFFSET + + /* + * As IVPR is going to point RAM address, + * Make sure IVOR15 has valid opcode to support debugger + */ + mtspr IVOR15,r0 + + /* + * Re-point the IVPR at RAM + */ + mtspr IVPR,r10 + mtlr r0 blr /* NEVER RETURNS! */ .globl in_ram @@ -1045,7 +1785,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0,r3,r4 beq 6f @@ -1055,14 +1795,14 @@ clear_bss: stw r0,0(r3) addi r3,r3,4 cmplw 0,r3,r4 - bne 5b + blt 5b 6: mr r3,r9 /* Init Data pointer */ mr r4,r10 /* Destination Address */ bl board_init_r -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL /* * Copy exception vector code to low memory * @@ -1117,6 +1857,39 @@ trap_init: cmplw 0,r7,r8 blt 2b + /* Update IVORs as per relocated vector table address */ + li r7,0x0100 + mtspr IVOR0,r7 /* 0: Critical input */ + li r7,0x0200 + mtspr IVOR1,r7 /* 1: Machine check */ + li r7,0x0300 + mtspr IVOR2,r7 /* 2: Data storage */ + li r7,0x0400 + mtspr IVOR3,r7 /* 3: Instruction storage */ + li r7,0x0500 + mtspr IVOR4,r7 /* 4: External interrupt */ + li r7,0x0600 + mtspr IVOR5,r7 /* 5: Alignment */ + li r7,0x0700 + mtspr IVOR6,r7 /* 6: Program check */ + li r7,0x0800 + mtspr IVOR7,r7 /* 7: floating point unavailable */ + li r7,0x0900 + mtspr IVOR8,r7 /* 8: System call */ + /* 9: Auxiliary processor unavailable(unsupported) */ + li r7,0x0a00 + mtspr IVOR10,r7 /* 10: Decrementer */ + li r7,0x0b00 + mtspr IVOR11,r7 /* 11: Interval timer */ + li r7,0x0c00 + mtspr IVOR12,r7 /* 12: Watchdog timer */ + li r7,0x0d00 + mtspr IVOR13,r7 /* 13: Data TLB error */ + li r7,0x0e00 + mtspr IVOR14,r7 /* 14: Instruction TLB error */ + li r7,0x0f00 + mtspr IVOR15,r7 /* 15: Debug */ + lis r7,0x0 mtspr IVPR,r7 @@ -1133,6 +1906,7 @@ unlock_ram_in_cache: slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT) mtctr r4 1: dcbi r0,r3 + dcblc r0,r3 addi r3,r3,CONFIG_SYS_CACHELINE_SIZE bdnz 1b sync @@ -1202,4 +1976,4 @@ setup_ivors: #include "fixed_ivor.S" blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */