X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Fcpu.c;h=fbee753903fde00b21e1562f9929c43f78855c09;hb=f9c1456cf632175afb7d6b27f42f1aab8432be0f;hp=f493483c1ede543e015eb9d0575a8c1315b87328;hpb=379c5145ef8f3adbcfeb0a47503838627959cb67;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index f493483..fbee753 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,26 +60,32 @@ int checkcpu (void)
 	uint major, minor;
 	struct cpu_type *cpu;
 	char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || \
-	(defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2))
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+	defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
-	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
-		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+	/*
+	 * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+	 * mode. Previous platform use ddr ratio to do the same. This
+	 * information is only for display here.
+	 */
 #ifdef CONFIG_FSL_CORENET
-	u32 ddr_sync ;
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
-	ddr_sync = 0;	/* only async mode is supported */
+	u32 ddr_sync = 0;	/* only async mode is supported */
 #else
-	ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+	u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
 		>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else	/* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
 	u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
 #endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
 	unsigned int i, core, nr_cores = cpu_numcores();
 	u32 mask = cpu_mask();
 
@@ -98,7 +104,7 @@ int checkcpu (void)
 		puts("CPU:   ");
 	}
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 	puts(cpu->name);
 	if (IS_E_PROCESSOR(svr))
@@ -115,16 +121,16 @@ int checkcpu (void)
 	switch(ver) {
 	case PVR_VER_E500_V1:
 	case PVR_VER_E500_V2:
-		puts("E500");
+		puts("e500");
 		break;
 	case PVR_VER_E500MC:
-		puts("E500MC");
+		puts("e500mc");
 		break;
 	case PVR_VER_E5500:
-		puts("E5500");
+		puts("e5500");
 		break;
 	case PVR_VER_E6500:
-		puts("E6500");
+		puts("e6500");
 		break;
 	default:
 		puts("Unknown");
@@ -211,6 +217,10 @@ int checkcpu (void)
 	}
 #endif
 
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+#endif
+
 #ifdef CONFIG_SYS_DPAA_PME
 	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freqPME));
 #endif
@@ -272,14 +282,6 @@ unsigned long get_tbclk (void)
 
 #if defined(CONFIG_WATCHDOG)
 void
-watchdog_reset(void)
-{
-	int re_enable = disable_interrupts();
-	reset_85xx_watchdog();
-	if (re_enable) enable_interrupts();
-}
-
-void
 reset_85xx_watchdog(void)
 {
 	/*
@@ -287,6 +289,16 @@ reset_85xx_watchdog(void)
 	 */
 	mtspr(SPRN_TSR, TSR_WIS);
 }
+
+void
+watchdog_reset(void)
+{
+	int re_enable = disable_interrupts();
+
+	reset_85xx_watchdog();
+	if (re_enable)
+		enable_interrupts();
+}
 #endif	/* CONFIG_WATCHDOG */
 
 /*
@@ -322,13 +334,14 @@ void mpc85xx_reginfo(void)
 
 /* Common ddr init for non-corenet fsl 85xx platforms */
 #ifndef CONFIG_FSL_CORENET
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR)
+#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
+	!defined(CONFIG_SYS_INIT_L2_ADDR)
 phys_size_t initdram(int board_type)
 {
 #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
 	return fsl_ddr_sdram_size();
 #else
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+	return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 #endif
 }
 #else /* CONFIG_SYS_RAMBOOT */
@@ -440,21 +453,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 			break;
 #endif
 		default: