X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fcpu%2Fmpc8260%2Fcommproc.c;h=484bd177451c3a36b1ba5c7c30152fe3c8275b0f;hb=b7ab8b8ff092ab8214eeb86e8a79573154f448b9;hp=111a67c98c5a1b669930b1ac13855d14193f3861;hpb=a77034a8dfc7942ca08483138dccdebeacc36826;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index 111a67c..484bd17 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -30,8 +30,8 @@ m8260_cpm_reset(void)
 
 	/* Reclaim the DP memory for our use.
 	*/
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+	gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+	gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
 
 	/*
 	 * Reset CPM
@@ -43,7 +43,7 @@ m8260_cpm_reset(void)
 	} while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
 
 #ifdef CONFIG_HARD_I2C
-	*((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
+	immr->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] = 0;
 #endif
 }
 
@@ -60,21 +60,22 @@ m8260_cpm_dpalloc(uint size, uint align)
 	uint	savebase;
 
 	align_mask = align - 1;
-	savebase = gd->dp_alloc_base;
+	savebase = gd->arch.dp_alloc_base;
 
-	if ((off = (gd->dp_alloc_base & align_mask)) != 0)
-		gd->dp_alloc_base += (align - off);
+	off = gd->arch.dp_alloc_base & align_mask;
+	if (off != 0)
+		gd->arch.dp_alloc_base += (align - off);
 
 	if ((off = size & align_mask) != 0)
 		size += align - off;
 
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
-		gd->dp_alloc_base = savebase;
+	if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+		gd->arch.dp_alloc_base = savebase;
 		panic("m8260_cpm_dpalloc: ran out of dual port ram!");
 	}
 
-	retloc = gd->dp_alloc_base;
-	gd->dp_alloc_base += size;
+	retloc = gd->arch.dp_alloc_base;
+	gd->arch.dp_alloc_base += size;
 
 	memset((void *)&immr->im_dprambase[retloc], 0, size);
 
@@ -101,7 +102,7 @@ m8260_cpm_hostalloc(uint size, uint align)
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	gd->brg_clk
+#define BRG_INT_CLK	gd->arch.brg_clk
 #define BRG_UART_CLK	(BRG_INT_CLK / 16)
 
 /* This function is used by UARTs, or anything else that uses a 16x
@@ -175,47 +176,3 @@ m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 	else
 		*bp |= CPM_BRG_EXTC_CLK5_15;
 }
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	return *save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
-	save_addr[0] = a;
-	save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
-	if (save_addr[1] != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */