X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Fm68k%2Fcpu%2Fmcf5445x%2Fspeed.c;h=55d1c488a317f5e11e803fb2a2a2f7901062c93d;hb=45370e1836dc0a7ac8e1d4828924e971d01fd92a;hp=d71b5fe8420bb5c5aed0cfb92d4d1fa4ea72c539;hpb=c1568ca5450cc20eb0f15246656724a1df9699c3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index d71b5fe..55d1c48 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -57,8 +57,10 @@ void clock_enter_limp(int lpdiv)
 	/* Round divider down to nearest power of two */
 	for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
 
+#ifdef CONFIG_MCF5445x
 	/* Apply the divider to the system clock */
 	clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i));
+#endif
 
 	/* Enable Limp Mode */
 	setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
@@ -81,12 +83,66 @@ void clock_exit_limp(void)
 		;
 }
 
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
-int get_clocks(void)
+#ifdef CONFIG_MCF5441x
+void setup_5441x_clocks(void)
 {
+	ccm_t *ccm = (ccm_t *)MMAP_CCM;
+	pll_t *pll = (pll_t *)MMAP_PLL;
+	int temp, vco = 0, bootmod_ccr, pdr;
+
+	bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14;
+
+	switch (bootmod_ccr) {
+	case 0:
+		out_be32(&pll->pcr, 0x00000013);
+		out_be32(&pll->pdr, 0x00e70c61);
+		clock_exit_limp();
+		break;
+	case 2:
+		break;
+	case 3:
+		break;
+	}
 
+	/*Change frequency for Modelo SER1 USB host*/
+#ifdef CONFIG_LOW_MCFCLK
+	temp = in_be32(&pll->pcr);
+	temp &= ~0x3f;
+	temp |= 5;
+	out_be32(&pll->pcr, temp);
+
+	temp = in_be32(&pll->pdr);
+	temp &= ~0x001f0000;
+	temp |= 0x00040000;
+	out_be32(&pll->pdr, temp);
+	__asm__("tpf");
+#endif
+
+	setbits_be16(&ccm->misccr2, 0x02);
+
+	vco =  ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) *
+		CONFIG_SYS_INPUT_CLKSRC;
+	gd->vco_clk = vco;
+
+	gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
+
+	pdr = in_be32(&pll->pdr);
+	temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1;
+	gd->cpu_clk = vco / temp;	/* cpu clock */
+	gd->flb_clk = vco / temp;	/* FlexBus clock */
+	gd->flb_clk >>= 1;
+	if (in_be16(ccm->misccr2) & 2)		/* fsys/4 */
+		gd->flb_clk >>= 1;
+
+	temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1;
+	gd->bus_clk = vco / temp;	/* bus clock */
+
+}
+#endif
+
+#ifdef CONFIG_MCF5445x
+void setup_5445x_clocks(void)
+{
 	ccm_t *ccm = (ccm_t *)MMAP_CCM;
 	pll_t *pll = (pll_t *)MMAP_PLL;
 	int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
@@ -220,6 +276,22 @@ int get_clocks(void)
 #ifdef CONFIG_FSL_I2C
 	gd->i2c1_clk = gd->bus_clk;
 #endif
+}
+#endif
+
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
+int get_clocks(void)
+{
+#ifdef CONFIG_MCF5441x
+	setup_5441x_clocks();
+#endif
+#ifdef CONFIG_MCF5445x
+	setup_5445x_clocks();
+#endif
+
+#ifdef CONFIG_FSL_I2C
+	gd->i2c1_clk = gd->bus_clk;
+#endif
 
 	return (0);
 }