X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Farm%2Fmach-uniphier%2FKconfig;h=1aed55a539bddb162053634ef6d6a9ee7335891f;hb=19d1f1a2f3ccfbf85125150f7876ce22714b38bd;hp=89614581bb1ff6329f038d40a3420aaaa616a9d6;hpb=067716bac59716b07f1ee70d9bf6e5528289bb45;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 8961458..1aed55a 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -8,70 +8,77 @@ config ARCH_UNIPHIER_32BIT
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select ARMV7_NONSEC
-
-config ARCH_UNIPHIER_64BIT
-	bool
-	select ARM64
-	select SPL_SEPARATE_BSS
-	select ARMV8_MULTIENTRY
-	select ARMV8_SPIN_TABLE
+	select ARCH_SUPPORT_PSCI
 
 choice
         prompt "UniPhier SoC select"
         default ARCH_UNIPHIER_PRO4
 
 config ARCH_UNIPHIER_SLD3
-	bool "UniPhier PH1-sLD3 SoC"
+	bool "UniPhier sLD3 SoC"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_LD4_SLD8
-	bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+	bool "UniPhier LD4/sLD8 SoCs"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_PRO4
-	bool "UniPhier PH1-Pro4 SoC"
+	bool "UniPhier Pro4 SoC"
 	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_PRO5_PXS2_LD6B
-	bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
+	bool "UniPhier Pro5/PXs2/LD6b SoCs"
 	select ARCH_UNIPHIER_32BIT
 
-config ARCH_UNIPHIER_LD11
-	bool "UniPhier PH1-LD11 SoC"
-	select ARCH_UNIPHIER_64BIT
-
-config ARCH_UNIPHIER_LD20
-	bool "UniPhier PH1-LD20 SoC"
-	select ARCH_UNIPHIER_64BIT
-	select OF_BOARD_SETUP
+config ARCH_UNIPHIER_V8_MULTI
+	bool "UniPhier V8 SoCs"
+	depends on !SPL
+	select ARM64
+	select CMD_UNZIP
 
 endchoice
 
 config ARCH_UNIPHIER_LD4
-	bool "Enable UniPhier PH1-LD4 SoC support"
+	bool "Enable UniPhier LD4 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
 config ARCH_UNIPHIER_SLD8
-	bool "Enable UniPhier PH1-sLD8 SoC support"
+	bool "Enable UniPhier sLD8 SoC support"
 	depends on ARCH_UNIPHIER_LD4_SLD8
 	default y
 
 config ARCH_UNIPHIER_PRO5
-	bool "Enable UniPhier PH1-Pro5 SoC support"
+	bool "Enable UniPhier Pro5 SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
 config ARCH_UNIPHIER_PXS2
-	bool "Enable UniPhier ProXstream2 SoC support"
+	bool "Enable UniPhier Pxs2 SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
 config ARCH_UNIPHIER_LD6B
-	bool "Enable UniPhier PH1-LD6b SoC support"
+	bool "Enable UniPhier LD6b SoC support"
 	depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
 	default y
 
+config ARCH_UNIPHIER_LD11
+	bool "Enable UniPhier LD11 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
+config ARCH_UNIPHIER_LD20
+	bool "Enable UniPhier LD20 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	select OF_BOARD_SETUP
+	default y
+
+config ARCH_UNIPHIER_PXS3
+	bool "Enable UniPhier PXs3 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
 config CACHE_UNIPHIER
 	bool "Enable the UniPhier L2 cache controller"
 	depends on ARCH_UNIPHIER_32BIT
@@ -98,7 +105,8 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
 	bool "Enable dump command of DDR PHY parameters"
-	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+	depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
+		ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
 	default y
 	help
 	  The command "ddrphy" shows the resulting parameters of DDR PHY