X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-omap3%2Fomap.h;h=8933f5489f88b64ae5048b2e13ffd00756501716;hb=235c5b8315c6a9eb566fd3d99a098cc6db869fc5;hp=194b93bf56dcedd2e71ae63d5a4986b80b769afd;hpb=a538ae997ae4cb375ba5362b50ba3f5b35f9519b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h
index 194b93b..8933f54 100644
--- a/arch/arm/include/asm/arch-omap3/omap.h
+++ b/arch/arm/include/asm/arch-omap3/omap.h
@@ -10,6 +10,8 @@
 #ifndef _OMAP3_H_
 #define _OMAP3_H_
 
+#include <linux/sizes.h>
+
 /* Stuff on L3 Interconnect */
 #define SMX_APE_BASE			0x68000000
 
@@ -51,6 +53,9 @@ struct control_prog_io {
 /* Bit definition for CONTROL_PROG_IO1 */
 #define PRG_I2C2_PULLUPRESX		0x00000001
 
+/* Scratchpad memory */
+#define OMAP34XX_SCRATCHPAD		(OMAP34XX_CTRL_BASE + 0x910)
+
 /* UART */
 #define OMAP34XX_UART1			(OMAP34XX_L4_IO_BASE + 0x6a000)
 #define OMAP34XX_UART2			(OMAP34XX_L4_IO_BASE + 0x6c000)
@@ -86,6 +91,9 @@ struct s32ktimer {
 	unsigned int s32k_cr;		/* 0x10 */
 };
 
+#define DEVICE_TYPE_SHIFT		0x8
+#define DEVICE_TYPE_MASK		(0x7 << DEVICE_TYPE_SHIFT)
+
 #endif /* __ASSEMBLY__ */
 
 #ifndef __ASSEMBLY__
@@ -142,6 +150,8 @@ struct gpio {
 
 #define NON_SECURE_SRAM_START		0x40208000 /* Works for GP & EMU */
 #define NON_SECURE_SRAM_END		0x40210000
+#define NON_SECURE_SRAM_IMG_END		0x4020F000
+#define SRAM_SCRATCH_SPACE_ADDR		(NON_SECURE_SRAM_IMG_END - SZ_1K)
 
 #define LOW_LEVEL_SRAM_STACK		0x4020FFFC
 
@@ -223,11 +233,20 @@ struct gpio {
 #define AM3517			0x1c00
 
 #define OMAP3730		0x0c00
+#define OMAP3725		0x4c00
+#define AM3715			0x1c00
+#define AM3703			0x5c00
+
+#define OMAP3730_1GHZ		0x0e00
+#define OMAP3725_1GHZ		0x4e00
+#define AM3715_1GHZ		0x1e00
+#define AM3703_1GHZ		0x5e00
 
 /*
  * ROM code API related flags
  */
 #define OMAP3_GP_ROMCODE_API_L2_INVAL		1
+#define OMAP3_GP_ROMCODE_API_WRITE_L2ACR	2
 #define OMAP3_GP_ROMCODE_API_WRITE_ACR		3
 
 /*
@@ -245,4 +264,22 @@ struct gpio {
 /* ABB tranxdone mask */
 #define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 26)
 
+#define OMAP_REBOOT_REASON_OFFSET	0x04
+
+/* Boot parameters */
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	unsigned int boot_message;
+	unsigned char boot_device;
+	unsigned char reserved;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+	unsigned int boot_device_descriptor;
+};
+
+int omap_reboot_mode(char *mode, unsigned int length);
+int omap_reboot_mode_clear(void);
+int omap_reboot_mode_store(char *mode);
+#endif
+
 #endif