X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Farm%2Finclude%2Fasm%2Farch-mx6%2Fimx-regs.h;h=53bf05439d91c20188ee5de24c89e5d6ddedc16f;hb=c6b968da78ce3fa7224c0ddf15fe170c7c05b27e;hp=f24525e7afb7129d076f7bbcadc50f960f56e7b5;hpb=67ecb84ccbfd609170978833fd09b0b87fc4b630;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index f24525e..53bf054 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -9,12 +9,6 @@
 
 #define ARCH_MXC
 
-#ifdef CONFIG_MX6UL
-#define CONFIG_SYS_CACHELINE_SIZE	64
-#else
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#endif
-
 #define ROMCP_ARB_BASE_ADDR             0x00000000
 #define ROMCP_ARB_END_ADDR              0x000FFFFF
 
@@ -162,6 +156,7 @@
 #endif
 #define UART1_BASE                  (ATZ1_BASE_ADDR + 0x20000)
 #define ESAI1_BASE_ADDR             (ATZ1_BASE_ADDR + 0x24000)
+#define UART8_BASE                  (ATZ1_BASE_ADDR + 0x24000)
 #define SSI1_BASE_ADDR              (ATZ1_BASE_ADDR + 0x28000)
 #define SSI2_BASE_ADDR              (ATZ1_BASE_ADDR + 0x2C000)
 #define SSI3_BASE_ADDR              (ATZ1_BASE_ADDR + 0x30000)
@@ -226,8 +221,13 @@
 #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
 #define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
 
-#define CONFIG_SYS_FSL_SEC_ADDR     CAAM_BASE_ADDR
-#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + 0x1000)
+#define CONFIG_SYS_FSL_SEC_OFFSET   0
+#define CONFIG_SYS_FSL_SEC_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET   0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
 
 #define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
 #define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
@@ -273,6 +273,7 @@
 #define IP2APB_TZASC1_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x50000)
 #ifdef CONFIG_MX6UL
 #define QSPI0_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define UART6_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x7C000)
 #elif defined(CONFIG_MX6SX)
 #define SAI1_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x54000)
 #define AUDMUX_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x58000)
@@ -356,6 +357,30 @@ extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
 #define SRC_SCR_CORE_3_ENABLE_OFFSET    24
 #define SRC_SCR_CORE_3_ENABLE_MASK      (1<<SRC_SCR_CORE_3_ENABLE_OFFSET)
 
+struct rdc_regs {
+	u32	vir;		/* Version information */
+	u32	reserved1[8];
+	u32	stat;		/* Status */
+	u32	intctrl;	/* Interrupt and Control */
+	u32	intstat;	/* Interrupt Status */
+	u32	reserved2[116];
+	u32	mda[32];	/* Master Domain Assignment */
+	u32	reserved3[96];
+	u32	pdap[104];	/* Peripheral Domain Access Permissions */
+	u32	reserved4[88];
+	struct {
+		u32 mrsa;	/* Memory Region Start Address */
+		u32 mrea;	/* Memory Region End Address */
+		u32 mrc;	/* Memory Region Control */
+		u32 mrvs;	/* Memory Region Violation Status */
+	} mem_region[55];
+};
+
+struct rdc_sema_regs {
+	u8	gate[64];	/* Gate */
+	u16	rstgt;		/* Reset Gate */
+};
+
 /* WEIM registers */
 struct weim {
 	u32 cs0gcr1;
@@ -414,6 +439,11 @@ struct src {
 	u32     gpr10;
 };
 
+#define SRC_SCR_M4_ENABLE_OFFSET                22
+#define SRC_SCR_M4_ENABLE_MASK                  (1 << 22)
+#define SRC_SCR_M4C_NON_SCLR_RST_OFFSET         4
+#define SRC_SCR_M4C_NON_SCLR_RST_MASK           (1 << 4)
+
 /* GPR1 bitfields */
 #define IOMUXC_GPR1_APP_CLK_REQ_N		BIT(30)
 #define IOMUXC_GPR1_PCIE_EXIT_L1		BIT(28)
@@ -715,39 +745,22 @@ struct fuse_bank1_regs {
 	u32	rsvd7[3];
 };
 
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
 struct fuse_bank4_regs {
 	u32 sjc_resp_low;
 	u32 rsvd0[3];
 	u32 sjc_resp_high;
 	u32 rsvd1[3];
-	u32 mac_addr_low;
+	u32 mac_addr0;
 	u32 rsvd2[3];
-	u32 mac_addr_high;
+	u32 mac_addr1;
 	u32 rsvd3[3];
-	u32 mac_addr2;
+	u32 mac_addr2; /*For i.MX6SX and i.MX6UL*/
 	u32 rsvd4[7];
 	u32 gp1;
 	u32 rsvd5[3];
 	u32 gp2;
 	u32 rsvd6[3];
 };
-#else
-struct fuse_bank4_regs {
-	u32	sjc_resp_low;
-	u32     rsvd0[3];
-	u32     sjc_resp_high;
-	u32     rsvd1[3];
-	u32	mac_addr_low;
-	u32     rsvd2[3];
-	u32     mac_addr_high;
-	u32	rsvd3[0xb];
-	u32	gp1;
-	u32	rsvd4[3];
-	u32	gp2;
-	u32	rsvd5[3];
-};
-#endif
 
 struct aipstz_regs {
 	u32	mprot0;