X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Farm%2Fdts%2Fzynqmp-zcu104-revC.dts;h=d4b3769a27ccae6e212520173d6bf5386ecb803b;hb=04da42770b0cc3bea8841972bfc9568299ece826;hp=4044eea1271199b6abcb148b76cfc6f9c82b2339;hpb=3d82d7167f139e35418bbdb21afcc3f21bdc71d4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 4044eea..d4b3769 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -56,6 +56,38 @@
 	status = "okay";
 };
 
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
 &gem3 {
 	status = "okay";
 	phy-handle = <&phy0>;
@@ -65,6 +97,7 @@
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
 		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
 	};
 };
 
@@ -139,15 +172,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
-				#clock-cells = <0>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
 				compatible = "infineon,irps5401";
-				reg = <0x43>;
+				reg = <0x43>; /* pmbus / i2c 0x13 */
 			};
-			irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
-				#clock-cells = <0>;
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
 				compatible = "infineon,irps5401";
-				reg = <0x4d>;
+				reg = <0x44>; /* pmbus / i2c 0x14 */
 			};
 		};
 
@@ -189,19 +220,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};