X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=c5027c1338f6cdec12fd17e89643753b1285fe54;hb=44fb0d6c9f5147a41c710032869e5e01b3c9e310;hp=1cd7aeb7da7ef8ed9612f9e36783d10acd3aaf6a;hpb=222701e157176a66628e4f399f52ca3307b018c9;p=platform%2Fkernel%2Fu-boot.git diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cd7aeb..c5027c1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -329,6 +329,12 @@ config SYS_CACHELINE_SIZE default 64 if SYS_CACHE_SHIFT_6 default 32 if SYS_CACHE_SHIFT_5 +config ARCH_CPU_INIT + bool "Enable ARCH_CPU_INIT" + help + Some architectures require a call to arch_cpu_init() + Say Y here to enable it + config SYS_ARCH_TIMER bool "ARM Generic Timer support" depends on CPU_V7A || ARM64 @@ -367,7 +373,7 @@ config SYS_THUMB_BUILD config SPL_SYS_THUMB_BUILD bool "Build SPL using the Thumb instruction set" default y if SYS_THUMB_BUILD - depends on !ARM64 + depends on !ARM64 && SPL help Use this flag to build SPL using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code @@ -414,7 +420,7 @@ config USE_ARCH_MEMCPY config SPL_USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy for SPL" default y if USE_ARCH_MEMCPY - depends on !ARM64 + depends on !ARM64 && SPL help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions @@ -423,7 +429,7 @@ config SPL_USE_ARCH_MEMCPY config TPL_USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy for TPL" default y if USE_ARCH_MEMCPY - depends on !ARM64 + depends on !ARM64 && TPL help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions @@ -441,7 +447,7 @@ config USE_ARCH_MEMSET config SPL_USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset for SPL" default y if USE_ARCH_MEMSET - depends on !ARM64 + depends on !ARM64 && SPL help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions @@ -450,15 +456,32 @@ config SPL_USE_ARCH_MEMSET config TPL_USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset for TPL" default y if USE_ARCH_MEMSET - depends on !ARM64 + depends on !ARM64 && TPL help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. +config SET_STACK_SIZE + bool "Enable an option to set max stack size that can be used" + default y if ARCH_VERSAL || ARCH_ZYNQMP + help + This will enable an option to set max stack size that can be + used by u-boot. + +config STACK_SIZE + hex "Define max stack size that can be used by u-boot" + depends on SET_STACK_SIZE + default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP + help + Defines Max stack size that can be used by u-boot so that the + initrd_high will be calculated as base stack pointer minus this + stack size. + config ARM64_SUPPORT_AARCH32 bool "ARM64 system support AArch32 execution state" - default y if ARM64 && !TARGET_THUNDERX_88XX + depends on ARM64 + default y if !TARGET_THUNDERX_88XX help This ARM64 system supports AArch32 execution state. @@ -805,7 +828,7 @@ config ARCH_MX7 select ARCH_MISC_INIT select BOARD_EARLY_INIT_F select CPU_V7A - select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_HAS_SEC if IMX_HAB select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE imply MXC_GPIO @@ -813,7 +836,7 @@ config ARCH_MX7 config ARCH_MX6 bool "Freescale MX6" select CPU_V7A - select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_HAS_SEC if IMX_HAB select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select SYS_THUMB_BUILD if SPL @@ -895,10 +918,14 @@ config ARCH_SOCFPGA select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 select SPL_SERIAL_SUPPORT + select SPL_SYSRESET select SPL_WATCHDOG_SUPPORT select SUPPORT_SPL select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 + select SYSRESET + select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 + select SYSRESET_SOCFPGA_S10 if TARGET_SOCFPGA_STRATIX10 imply CMD_DM imply CMD_MTDPARTS imply CRC32_VERIFY @@ -943,7 +970,7 @@ config ARCH_SUNXI select USB if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM imply CMD_GPT imply CMD_UBI if NAND @@ -969,6 +996,7 @@ config ARCH_VERSAL select DM_MMC if MMC select DM_SERIAL select OF_CONTROL + imply BOARD_LATE_INIT config ARCH_VF610 bool "Freescale Vybrid" @@ -1023,16 +1051,21 @@ config ARCH_ZYNQMP select CLK select DM select DM_ETH if NET + select DM_MAILBOX select DM_MMC if MMC select DM_SERIAL select DM_SPI if SPI select DM_SPI_FLASH if DM_SPI select DM_USB if USB + select FIRMWARE select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL + select SPL_DM_MAILBOX if SPL + select SPL_FIRMWARE if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL + select ZYNQMP_IPI imply BOARD_LATE_INIT imply CMD_DM imply FAT_WRITE @@ -1055,16 +1088,6 @@ config TARGET_VEXPRESS64_BASE_FVP select PL01X_SERIAL select SEMIHOSTING -config TARGET_VEXPRESS64_BASE_FVP_DRAM - bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" - select ARM64 - select PL01X_SERIAL - help - This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides - the default config to allow the user to load the images directly into - DRAM using model parameters rather than by using semi-hosting to load - the files from the host filesystem. - config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 @@ -1089,6 +1112,7 @@ config TARGET_LS2080A_SIMU select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon @@ -1205,6 +1229,18 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. +config TARGET_HIKEY960 + bool "Support HiKey960 96boards Consumer Edition Platform" + select ARM64 + select DM + select DM_SERIAL + select OF_CONTROL + select PL01X_SERIAL + imply CMD_DM + help + Support for HiKey960 96boards platform. It features a HI3660 + SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM. + config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 @@ -1290,6 +1326,8 @@ config TARGET_LS1028AQDS select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT + select BOARD_LATE_INIT + select ARCH_MISC_INIT help Support for Freescale LS1028AQDS platform The LS1028A Development System (QDS) is a high-performance @@ -1541,6 +1579,7 @@ config ARCH_STM32MP imply SPL_SYSRESET imply CMD_DM imply CMD_POWEROFF + imply OF_LIBFDT_OVERLAY imply ENV_VARS_UBOOT_RUNTIME_CONFIG imply USE_PREBOOT help @@ -1774,6 +1813,7 @@ source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" +source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/phytec/pcm051/Kconfig"