X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=e2efef06301310594f28cf364e232a311bf5f700;hb=c5646270d1783982fc76eff831e5f3e63cb626cd;hp=a514f48caefc68b8453b8cc7ce0da3581f3504a8;hpb=683754f0aae6a17f82370d5c902af54c316b8f35;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index a514f48..e2efef0 100644
--- a/README
+++ b/README
@@ -634,8 +634,6 @@ The following options need to be configured:
 		the defaults discussed just above.
 
 - Cache Configuration:
-		CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot
-		CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot
 		CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot
 
 - Cache Configuration for ARM:
@@ -1120,9 +1118,6 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF
 
-		CONFIG_SUPPORT_EMMC_BOOT
-		Enable some additional features of the eMMC boot partitions.
-
 - USB Device Firmware Update (DFU) class support:
 		CONFIG_DFU_OVER_USB
 		This enables the USB portion of the DFU USB class
@@ -2423,9 +2418,6 @@ FIT uImage format:
 		When defined, the linker checks that the actual size does
 		not exceed it.
 
-		CONFIG_SPL_TEXT_BASE
-		TEXT_BASE for linking the SPL binary.
-
 		CONFIG_SPL_RELOC_TEXT_BASE
 		Address to relocate to.  If unspecified, this is equal to
 		CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
@@ -3302,12 +3294,12 @@ within that device.
 
 - CONFIG_SYS_FMAN_FW_ADDR
 	The address in the storage device where the FMAN microcode is located.  The
-	meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+	meaning of this address depends on which CONFIG_SYS_QE_FMAN_FW_IN_xxx macro
 	is also specified.
 
 - CONFIG_SYS_QE_FW_ADDR
 	The address in the storage device where the QE microcode is located.  The
-	meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+	meaning of this address depends on which CONFIG_SYS_QE_FMAN_FW_IN_xxx macro
 	is also specified.
 
 - CONFIG_SYS_QE_FMAN_FW_LENGTH