X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=983d55ecea2c6a297bbccc38164b1e098d293a96;hb=c8b281524bf98ee5a52db7da71bccdea002df3f5;hp=14c83f4bb1796698e3a88b192a390395c51febeb;hpb=0c669fd17a9d8452f70369474925a91139e3005d;p=platform%2Fkernel%2Fu-boot.git diff --git a/README b/README index 14c83f4..983d55e 100644 --- a/README +++ b/README @@ -201,7 +201,6 @@ Directory Hierarchy: /mpc5xx Files specific to Freescale MPC5xx CPUs /mpc5xxx Files specific to Freescale MPC5xxx CPUs /mpc8xx Files specific to Freescale MPC8xx CPUs - /mpc8220 Files specific to Freescale MPC8220 CPUs /mpc824x Files specific to Freescale MPC824x CPUs /mpc8260 Files specific to Freescale MPC8260 CPUs /mpc85xx Files specific to Freescale MPC85xx CPUs @@ -414,11 +413,22 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600 according to the A004510 workaround. + CONFIG_SYS_FSL_DSP_M2_RAM_ADDR + This value denotes start offset of M2 memory + which is directly connected to the DSP core. + + CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT + This value denotes start offset of DSP CCSR space. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN @@ -844,6 +854,7 @@ The following options need to be configured: CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_FUSE Device fuse support CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment @@ -898,6 +909,7 @@ The following options need to be configured: CONFIG_CMD_SF * Read/write/erase SPI NOR flash CONFIG_CMD_SHA1SUM print sha1 memory digest (requires CONFIG_CMD_MEMORY) + CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode @@ -930,6 +942,13 @@ The following options need to be configured: XXX - this list needs to get updated! +- Regular expression support: + CONFIG_REGEX + If this variable is defined, U-Boot is linked against + the SLRE (Super Light Regular Expression) library, + which adds regex support to some commands, as for + example "env grep" and "setexpr". + - Device tree: CONFIG_OF_CONTROL If this variable is defined, U-Boot will use a device tree @@ -1201,7 +1220,23 @@ The following options need to be configured: If this option is set, the driver enables cache flush. - TPM Support: - CONFIG_GENERIC_LPC_TPM + CONFIG_TPM + Support TPM devices. + + CONFIG_TPM_TIS_I2C + Support for i2c bus TPM devices. Only one device + per system is supported at this time. + + CONFIG_TPM_TIS_I2C_BUS_NUMBER + Define the the i2c bus number for the TPM device + + CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS + Define the TPM's address on the i2c bus + + CONFIG_TPM_TIS_I2C_BURST_LIMITATION + Define the burst count bytes upper limit + + CONFIG_TPM_TIS_LPC Support for generic parallel port TPM devices. Only one device per system is supported at this time. @@ -1237,6 +1272,9 @@ The following options need to be configured: CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. + CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum + interval for usb hub power-on delay.(minimum 100msec) + - USB Device: Define the below if you wish to use the USB console. Once firmware is rebuilt from a serial console issue the @@ -2831,8 +2869,18 @@ FIT uImage format: CONFIG_SPL_LDSCRIPT LDSCRIPT for linking the SPL binary. + CONFIG_SPL_MAX_FOOTPRINT + Maximum size in memory allocated to the SPL, BSS included. + When defined, the linker checks that the actual memory + used by SPL from _start to __bss_end does not exceed it. + CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE + must not be both defined at the same time. + CONFIG_SPL_MAX_SIZE - Maximum binary size (text, data and rodata) of the SPL binary. + Maximum size of the SPL image (text, data, rodata, and + linker lists sections), BSS excluded. + When defined, the linker checks that the actual size does + not exceed it. CONFIG_SPL_TEXT_BASE TEXT_BASE for linking the SPL binary. @@ -2845,7 +2893,11 @@ FIT uImage format: Link address for the BSS within the SPL binary. CONFIG_SPL_BSS_MAX_SIZE - Maximum binary size of the BSS section of the SPL binary. + Maximum size in memory allocated to the SPL BSS. + When defined, the linker checks that the actual memory used + by SPL from __bss_start to __bss_end does not exceed it. + CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE + must not be both defined at the same time. CONFIG_SPL_STACK Adress of the start of the stack SPL will use @@ -2894,12 +2946,30 @@ FIT uImage format: Address, size and partition on the MMC to load U-Boot from when the MMC is being used in raw mode. + CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR + Sector to load kernel uImage from when MMC is being + used in raw mode (for Falcon mode) + + CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, + CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS + Sector and number of sectors to load kernel argument + parameters from when MMC is being used in raw mode + (for falcon mode) + CONFIG_SPL_FAT_SUPPORT Support for fs/fat/libfat.o in SPL binary CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME Filename to read to load U-Boot when reading from FAT + CONFIG_SPL_FAT_LOAD_KERNEL_NAME + Filename to read to load kernel uImage when reading + from FAT (for Falcon mode) + + CONFIG_SPL_FAT_LOAD_ARGS_NAME + Filename to read to load kernel argument parameters + when reading from FAT (for Falcon mode) + CONFIG_SPL_MPC83XX_WAIT_FOR_NAND Set this for NAND SPL on PPC mpc83xx targets, so that start.S waits for the rest of the SPL to load before @@ -2975,6 +3045,12 @@ FIT uImage format: use an arch-specific makefile fragment instead, for example if more than one image needs to be produced. + CONFIG_FIT_SPL_PRINT + Printing information about a FIT image adds quite a bit of + code to SPL. So this is normally disabled in SPL. Use this + option to re-enable it. This will affect the output of the + bootm command when booting a FIT image. + Modem Support: -------------- @@ -3234,6 +3310,15 @@ Configuration Settings: digits and dots. Recommended value: 45 (9..1) for 80 column displays, 15 (3..1) for 40 column displays. +- CONFIG_FLASH_VERIFY + If defined, the content of the flash (destination) is compared + against the source after the write operation. An error message + will be printed when the contents are not identical. + Please note that this option is useless in nearly all cases, + since such flash programming errors usually are detected earlier + while unprotecting/erasing/programming. Please only enable + this option if you really know what you are doing. + - CONFIG_SYS_RX_ETH_BUFFER: Defines the number of Ethernet receive buffers. On some Ethernet controllers it is recommended to set this value @@ -3309,6 +3394,10 @@ Configuration Settings: offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than directly. You should not need to touch this setting. +- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) + This is set by OMAP boards for the max time that reset should + be asserted. See doc/README.omap-reset-time for details on how + the value can be calulated on a given board. The following definitions that deal with the placement and management of environment data (variable area); in general, we support the @@ -3570,6 +3659,57 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. You will probably want to define these to avoid a really noisy system when storing the env in UBI. +- CONFIG_ENV_IS_IN_MMC: + + Define this if you have an MMC device which you want to use for the + environment. + + - CONFIG_SYS_MMC_ENV_DEV: + + Specifies which MMC device the environment is stored in. + + - CONFIG_SYS_MMC_ENV_PART (optional): + + Specifies which MMC partition the environment is stored in. If not + set, defaults to partition 0, the user area. Common values might be + 1 (first MMC boot partition), 2 (second MMC boot partition). + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the specified MMC device. + + If offset is positive (the usual case), it is treated as relative to + the start of the MMC partition. If offset is negative, it is treated + as relative to the end of the MMC partition. This can be useful if + your board may be fitted with different MMC devices, which have + different sizes for the MMC partitions, and you always want the + environment placed at the very end of the partition, to leave the + maximum possible space before it, to store other data. + + These two values are in units of bytes, but must be aligned to an + MMC sector boundary. + + - CONFIG_ENV_OFFSET_REDUND (optional): + + Specifies a second storage area, of CONFIG_ENV_SIZE size, used to + hold a redundant copy of the environment data. This provides a + valid backup copy in case the other copy is corrupted, e.g. due + to a power failure during a "saveenv" operation. + + This value may also be positive or negative; this is handled in the + same way as CONFIG_ENV_OFFSET. + + This value is also in units of bytes, but must also be aligned to + an MMC sector boundary. + + - CONFIG_ENV_SIZE_REDUND (optional): + + This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is + set. If this value is set, it must be set to the same value as + CONFIG_ENV_SIZE. + - CONFIG_SYS_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The @@ -3823,6 +3963,9 @@ Low Level (hardware related) configuration options: a second time. Useful for platforms that are pre-booted by coreboot or similar. +- CONFIG_PCI_INDIRECT_BRIDGE: + Enable support for indirect PCI bridges. + - CONFIG_SYS_SRIO: Chip has SRIO or not @@ -3832,6 +3975,9 @@ Low Level (hardware related) configuration options: - CONFIG_SRIO2: Board has SRIO 2 port available +- CONFIG_SRIO_PCIE_BOOT_MASTER + Board can support master function for Boot from SRIO and PCIE + - CONFIG_SYS_SRIOn_MEM_VIRT: Virtual Address of SRIO port 'n' memory region @@ -5027,7 +5173,7 @@ On some platforms, it's possible to boot Linux zImage. This is done using the "bootz" command. The syntax of "bootz" command is the same as the syntax of "bootm" command. -Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply +Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply kernel with raw initrd images. The syntax is slightly different, the address of the initrd must be augmented by it's size, in the following format: ":".