X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=6f610082224e54fc0a31246cdea7ad688df1e6d1;hb=f8785e96c9f7249328b267d4c82e2218748e3729;hp=e74ce4c4e6dc228cf4c3d25ed9a7e43977504992;hpb=8aa1a2d115420b1eb126f69f3547b54d275c3228;p=platform%2Fkernel%2Fu-boot.git diff --git a/README b/README index e74ce4c..6f61008 100644 --- a/README +++ b/README @@ -126,12 +126,12 @@ Directory Hierarchy: - 74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs - arm720t Files specific to ARM 720 CPUs - arm920t Files specific to ARM 920 CPUs + - at91rm9200 Files specific to Atmel AT91RM9200 CPU - imx Files specific to Freescale MC9328 i.MX CPUs - s3c24x0 Files specific to Samsung S3C24X0 CPUs - arm925t Files specific to ARM 925 CPUs - arm926ejs Files specific to ARM 926 CPUs - arm1136 Files specific to ARM 1136 CPUs - - at91rm9200 Files specific to Atmel AT91RM9200 CPUs - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs @@ -145,7 +145,7 @@ Directory Hierarchy: - mpc85xx Files specific to Freescale MPC85xx CPUs - nios Files specific to Altera NIOS CPUs - nios2 Files specific to Altera Nios-II CPUs - - ppc4xx Files specific to IBM PowerPC 4xx CPUs + - ppc4xx Files specific to AMCC PowerPC 4xx CPUs - pxa Files specific to Intel XScale PXA CPUs - s3c44b0 Files specific to Samsung S3C44B0 CPUs - sa1100 Files specific to Intel StrongARM SA1100 CPUs @@ -261,51 +261,53 @@ The following options need to be configured: PowerPC based boards: --------------------- - CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405 - CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2 - CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6 - CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e - CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405 - CONFIG_c2mon CONFIG_hymod CONFIG_PM826 - CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260 - CONFIG_CCM CONFIG_ICU862 CONFIG_QS823 - CONFIG_CMI CONFIG_IP860 CONFIG_QS850 - CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T - CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823 - CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic - CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite - CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper - CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto - CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng - CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240 - CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245 - CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260 - CONFIG_DB64360 CONFIG_MBX CONFIG_sbc8560 - CONFIG_DB64460 CONFIG_MBX860T CONFIG_SM850 - CONFIG_DU405 CONFIG_MHPC CONFIG_SPD823TS - CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_STXGP3 - CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T - CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L - CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260 - CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L - CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L - CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L - CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech - CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245 - CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 - CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC - CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG - CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 - CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 - CONFIG_FPS860L CONFIG_ZUMA + CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCIPPC2 + CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC6 + CONFIG_AMX860 CONFIG_GTH CONFIG_pcu_e + CONFIG_AP1000 CONFIG_gw8260 CONFIG_PIP405 + CONFIG_AR405 CONFIG_hermes CONFIG_PM826 + CONFIG_BAB7xx CONFIG_hymod CONFIG_ppmc8260 + CONFIG_c2mon CONFIG_IAD210 CONFIG_QS823 + CONFIG_CANBT CONFIG_ICU862 CONFIG_QS850 + CONFIG_CCM CONFIG_IP860 CONFIG_QS860T + CONFIG_CMI CONFIG_IPHASE4539 CONFIG_RBC823 + CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RPXClassic + CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXlite + CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXsuper + CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_rsdproto + CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_sacsng + CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_Sandpoint8240 + CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8245 + CONFIG_CSB272 CONFIG_LANTEC CONFIG_sbc8260 + CONFIG_CU824 CONFIG_lwmon CONFIG_sbc8560 + CONFIG_DASA_SIM CONFIG_MBX CONFIG_SM850 + CONFIG_DB64360 CONFIG_MBX860T CONFIG_SPD823TS + CONFIG_DB64460 CONFIG_MHPC CONFIG_STXGP3 + CONFIG_DU405 CONFIG_MIP405 CONFIG_SXNI855T + CONFIG_DUET_ADS CONFIG_MOUSSE CONFIG_TQM823L + CONFIG_EBONY CONFIG_MPC8260ADS CONFIG_TQM8260 + CONFIG_ELPPC CONFIG_MPC8540ADS CONFIG_TQM850L + CONFIG_ELPT860 CONFIG_MPC8540EVAL CONFIG_TQM855L + CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM860L + CONFIG_ERIC CONFIG_MUSENKI CONFIG_TTTech + CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_UTX8245 + CONFIG_ETX094 CONFIG_NETPHONE CONFIG_V37 + CONFIG_EVB64260 CONFIG_NETTA CONFIG_W7OLMC + CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMG + CONFIG_FADS850SAR CONFIG_NX823 CONFIG_WALNUT + CONFIG_FADS860T CONFIG_OCRTC CONFIG_ZPC1900 + CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZUMA + CONFIG_FPS850L CONFIG_OXC + CONFIG_FPS860L CONFIG_PCI405 ARM based boards: ----------------- - CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, - CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, - CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, + CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250, + CONFIG_CSB637, CONFIG_DNP1110, CONFIG_EP7312, + CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7, + CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202, + CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 @@ -397,6 +399,20 @@ The following options need to be configured: expect it to be in bytes, others in MB. Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. + CONFIG_OF_FLAT_TREE + + New kernel versions are expecting firmware settings to be + passed using flat open firmware trees. + The environment variable "disable_of", when set, disables this + functionality. + + CONFIG_OF_FLAT_TREE_MAX_SIZE + + The maximum size of the constructed OF tree. + + OF_CPU - The proper name of the cpus node. + OF_TBCLK - The timebase frequency. + - Serial Ports: CFG_PL010_SERIAL @@ -497,7 +513,7 @@ The following options need to be configured: - Console UART Number: CONFIG_UART1_CONSOLE - IBM PPC4xx only. + AMCC PPC4xx only. If defined internal UART1 (and not UART0) is used as default U-Boot console. @@ -960,6 +976,12 @@ The following options need to be configured: allows for a "silent" boot where a splash screen is loaded very quickly after power-on. +- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP + + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen support or the bmp command. + - Compression support: CONFIG_BZIP2 @@ -1355,7 +1377,7 @@ The following options need to be configured: remaining RAM in a form that can be passed as boot argument to Linux, for instance like that: - setenv bootargs ... mem=\$(mem) + setenv bootargs ... mem=\${mem} saveenv This way you can tell Linux not to use this memory, @@ -1481,6 +1503,26 @@ The following options need to be configured: When SystemACE support is added, the "ace" device type becomes available to the fat commands, i.e. fatls. +- TFTP Fixed UDP Port: + CONFIG_TFTP_PORT + + If this is defined, the environment variable tftpsrcp + is used to supply the TFTP UDP source port value. + If tftpsrcp isn't defined, the normal pseudo-random port + number generator is used. + + Also, the environment variable tftpdstp is used to supply + the TFTP UDP destination port value. If tftpdstp isn't + defined, the normal port 69 is used. + + The purpose for tftpsrcp is to allow a TFTP server to + blindly start the TFTP transfer using the pre-configured + target IP address and UDP port. This has the effect of + "punching through" the (Windows XP) firewall, allowing + the remainder of the TFTP transfer to proceed normally. + A better solution is to properly configure the firewall, + but sometimes that is not allowed. + - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -1724,6 +1766,12 @@ Configuration Settings: This option also enables the building of the cfi_flash driver in the drivers directory +- CFG_FLASH_QUIET_TEST + If this option is defined, the common CFI flash doesn't + print it's warning upon not recognized FLASH banks. This + is useful, if some of the configured banks are only + optionally available. + - CFG_RX_ETH_BUFFER: Defines the number of ethernet receive buffers. On some ethernet controllers it is recommended to set this value @@ -2132,14 +2180,14 @@ Low Level (hardware related) configuration options: - CONFIG_SKIP_LOWLEVEL_INIT - CONFIG_SKIP_RELOCATE_UBOOT - [ARM only] If these variables are defined, then - certain low level initializations (like setting up - the memory controller) are omitted and/or U-Boot does - not relocate itself into RAM. - Normally these variables MUST NOT be defined. The - only exception is when U-Boot is loaded (to RAM) by - some other boot loader or by a debugger which - performs these intializations itself. + [ARM only] If these variables are defined, then + certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does + not relocate itself into RAM. + Normally these variables MUST NOT be defined. The + only exception is when U-Boot is loaded (to RAM) by + some other boot loader or by a debugger which + performs these intializations itself. Building the Software: @@ -2186,14 +2234,14 @@ configurations; the following names are supported: DUET_ADS_config MBX_config sbc8560_66_config EBONY_config MPC8260ADS_config SM850_config ELPT860_config MPC8540ADS_config SPD823TS_config - ESTEEM192E_config MPC8560ADS_config stxgp3_config - ETX094_config NETVIA_config SXNI855T_config - FADS823_config omap1510inn_config TQM823L_config - FADS850SAR_config omap1610h2_config TQM850L_config - FADS860T_config omap1610inn_config TQM855L_config - FPS850L_config omap5912osk_config TQM860L_config - omap2420h4_config WALNUT405_config - Yukon8220_config + ESTEEM192E_config MPC8540EVAL_config stxgp3_config + ETX094_config MPC8560ADS_config SXNI855T_config + FADS823_config NETVIA_config TQM823L_config + FADS850SAR_config omap1510inn_config TQM850L_config + FADS860T_config omap1610h2_config TQM855L_config + FPS850L_config omap1610inn_config TQM860L_config + omap5912osk_config walnut_config + omap2420h4_config Yukon8220_config ZPC1900_config Note: for some board special configuration names may exist; check if @@ -2446,6 +2494,12 @@ Some configuration options can be set using Environment Variables: Useful on scripts which control the retry operation themselves. + tftpsrcport - If this is set, the value is used for TFTP's + UDP source port. + + tftpdstport - If this is set, the value is used for TFTP's UDP + destination port instead of the Well Know Port 69. + vlan - When set to a value < 4095 the traffic over ethernet is encapsulated/received over 802.1q VLAN tagged frames. @@ -2498,10 +2552,10 @@ Old, simple command line parser: - supports environment variables (through setenv / saveenv commands) - several commands on one line, separated by ';' -- variable substitution using "... $(name) ..." syntax +- variable substitution using "... ${name} ..." syntax - special characters ('$', ';') can be escaped by prefixing with '\', for example: - setenv bootcmd bootm \$(address) + setenv bootcmd bootm \${address} - You can also escape text by enclosing in single apostrophes, for example: setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' @@ -3081,8 +3135,7 @@ Booting assumes that (the first part of) the image booted is a stage-2 loader which in turn loads and then invokes the kernel proper. Loader sources will eventually appear in the NetBSD source tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the -meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for -details. +meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz Implementation Internals: @@ -3136,7 +3189,7 @@ locked as (mis-) used as memory, etc. CFG_INIT_RAM_ADDR should be somewhere that won't interfere with your processor/board/system design. The default value you will find in any recent u-boot distribution in - Walnut405.h should work for you. I'd set it to a value larger + walnut.h should work for you. I'd set it to a value larger than your SDRAM module. If you have a 64MB SDRAM module, set it above 400_0000. Just make sure your board has no resources that are supposed to respond to that address! That code in @@ -3382,6 +3435,7 @@ Since the number of patches for U-Boot is growing, we need to establish some rules. Submissions which do not conform to these rules may be rejected, even when they contain important and valuable stuff. +Patches shall be sent to the u-boot-users mailing list. When you send a patch, please include the following information with it: @@ -3439,3 +3493,6 @@ Notes: (using #ifdef), and the resulting code with the new feature disabled must not need more memory than the old code without your modification. + +* Remember that there is a size limit of 40 kB per message on the + u-boot-users mailing list. Compression may help.