X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=6cb0567ba66b46aa2a6050fd71a43a9082827f69;hb=7a1a01c6029039e4fa6aa185cdbbf9a357eecba7;hp=d4bf74ce75d7aee50d360aa2f18553f04fcfb7b3;hpb=acc415ac60d1741a3b1496ab1d3e58232bac6174;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index d4bf74c..6cb0567 100644
--- a/README
+++ b/README
@@ -1250,48 +1250,6 @@ The following options need to be configured:
 		Enables an 'i2c edid' command which can read EDID
 		information over I2C from an attached LCD display.
 
-- Splash Screen Support: CONFIG_SPLASH_SCREEN
-
-		If this option is set, the environment is checked for
-		a variable "splashimage". If found, the usual display
-		of logo, copyright and system information on the LCD
-		is suppressed and the BMP image at the address
-		specified in "splashimage" is loaded instead. The
-		console is redirected to the "nulldev", too. This
-		allows for a "silent" boot where a splash screen is
-		loaded very quickly after power-on.
-
-		CONFIG_SPLASHIMAGE_GUARD
-
-		If this option is set, then U-Boot will prevent the environment
-		variable "splashimage" from being set to a problematic address
-		(see doc/README.displaying-bmps).
-		This option is useful for targets where, due to alignment
-		restrictions, an improperly aligned BMP image will cause a data
-		abort. If you think you will not have problems with unaligned
-		accesses (for example because your toolchain prevents them)
-		there is no need to set this option.
-
-		CONFIG_SPLASH_SCREEN_ALIGN
-
-		If this option is set the splash image can be freely positioned
-		on the screen. Environment variable "splashpos" specifies the
-		position as "x,y". If a positive number is given it is used as
-		number of pixel from left/top. If a negative number is given it
-		is used as number of pixel from right/bottom. You can also
-		specify 'm' for centering the image.
-
-		Example:
-		setenv splashpos m,m
-			=> image at center of screen
-
-		setenv splashpos 30,20
-			=> image at x = 30 and y = 20
-
-		setenv splashpos -10,m
-			=> vertically centered image
-			   at x = dspWidth - bmpWidth - 9
-
 - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
 
 		If this option is set, additionally to standard BMP
@@ -3444,6 +3402,11 @@ List of environment variables (most likely not complete):
 		  downloads succeed with high packet loss rates, or with
 		  unreliable TFTP servers or client hardware.
 
+  tftpwindowsize	- if this is set, the value is used for TFTP's
+		  window size as described by RFC 7440.
+		  This means the count of blocks we can receive before
+		  sending ack to server.
+
   vlan		- When set to a value < 4095 the traffic over
 		  Ethernet is encapsulated/received over 802.1q
 		  VLAN tagged frames.