X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=6800b959ca558e18b5e8ee7871f53bf5990fc89d;hb=180b8688dca2a7731a291a7660ae188e6eec84b8;hp=0fec497328bd5fd27df28efda7a14d828a106346;hpb=f10d86d3fff9f53723a404b3794cca98a785ce6a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index 0fec497..6800b95 100644
--- a/README
+++ b/README
@@ -182,7 +182,6 @@ Directory Hierarchy:
     /lib		Architecture specific library files
   /powerpc		Files generic to PowerPC architecture
     /cpu		CPU specific files
-      /74xx_7xx		Files specific to Freescale MPC74xx and 7xx CPUs
       /mpc5xx		Files specific to Freescale MPC5xx CPUs
       /mpc5xxx		Files specific to Freescale MPC5xxx CPUs
       /mpc8xx		Files specific to Freescale MPC8xx CPUs
@@ -1258,6 +1257,9 @@ The following options need to be configured:
 		SoC, then define this variable and provide board
 		specific code for the "hw_watchdog_reset" function.
 
+		CONFIG_AT91_HW_WDT_TIMEOUT
+		specify the timeout in seconds. default 2 seconds.
+
 - U-Boot Version:
 		CONFIG_VERSION_VARIABLE
 		If this variable is defined, an environment variable
@@ -3177,8 +3179,13 @@ CBFS (Coreboot Filesystem) support
 		This enables the RSA algorithm used for FIT image verification
 		in U-Boot. See doc/uImage.FIT/signature.txt for more information.
 
+		The Modular Exponentiation algorithm in RSA is implemented using
+		driver model. So CONFIG_DM needs to be enabled by default for this
+		library to function.
+
 		The signing part is build into mkimage regardless of this
-		option.
+		option. The software based modular exponentiation is built into
+		mkimage irrespective of this option.
 
 - bootcount support:
 		CONFIG_BOOTCOUNT_LIMIT
@@ -4909,6 +4916,9 @@ Low Level (hardware related) configuration options:
 - CONFIG_FSL_DDR_INTERACTIVE
 		Enable interactive DDR debugging. See doc/README.fsl-ddr.
 
+- CONFIG_FSL_DDR_SYNC_REFRESH
+		Enable sync of refresh for multiple controllers.
+
 - CONFIG_SYS_83XX_DDR_USES_CS0
 		Only for 83xx systems. If specified, then DDR should
 		be configured using CS0 and CS1 instead of CS2 and CS3.
@@ -5900,9 +5910,10 @@ option performs the converse operation of the mkimage's second form (the "-d"
 option). Given an image built by mkimage, the dumpimage extracts a "data file"
 from the image:
 
-	tools/dumpimage -i image -p position data_file
-	  -i ==> extract from the 'image' a specific 'data_file', \
-	   indexed by 'position'
+	tools/dumpimage -i image -T type -p position data_file
+	  -i ==> extract from the 'image' a specific 'data_file'
+	  -T ==> set image type to 'type'
+	  -p ==> 'position' (starting at 0) of the 'data_file' inside the 'image'
 
 
 Installing a Linux Image: