X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=47bc215fe9c57829090679585c409451aeefc578;hb=2997ee50547b34521c7e560055a490609e90a590;hp=7443b9fd41fe151ca3afa3a51a33eadc0f747557;hpb=cfa307f839f59f27b6fd1e80f3686e53b457f8dc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index 7443b9f..47bc215 100644
--- a/README
+++ b/README
@@ -127,7 +127,7 @@ releases in "stable" maintenance trees.
 Examples:
 	U-Boot v2009.11	    - Release November 2009
 	U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
-	U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+	U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
 
 
 Directory Hierarchy:
@@ -770,11 +770,6 @@ The following options need to be configured:
 		port routines must be defined elsewhere
 		(i.e. serial_init(), serial_getc(), ...)
 
-		CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
-			is 0x00.
-		CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
-			is 0xa0.
-
 - Console Baudrate:
 		CONFIG_BAUDRATE - in bps
 		Select one of the baudrates listed in
@@ -1594,7 +1589,7 @@ The following options need to be configured:
 		This will also enable the command "fatwrite" enabling the
 		user to write files to FAT.
 
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
 		CONFIG_CMD_CBFS
 
 		Define this to enable support for reading from a Coreboot
@@ -1619,17 +1614,6 @@ CBFS (Coreboot Filesystem) support
 		instead.
 
 - Video support:
-		CONFIG_VIDEO_SMI_LYNXEM
-		Enable Silicon Motion SMI 712/710/810 Video chip. The
-		video output is selected via environment 'videoout'
-		(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
-		assumed.
-
-		CONFIG_VIDEO_SED13806
-		Enable Epson SED13806 driver. This driver supports 8bpp
-		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
-		or CONFIG_VIDEO_SED13806_16BPP
-
 		CONFIG_FSL_DIU_FB
 		Enable the Freescale DIU video driver.	Reference boards for
 		SOCs that have a DIU should define this macro to enable DIU
@@ -1709,12 +1693,6 @@ CBFS (Coreboot Filesystem) support
 		here, since it is cheaper to change data cache settings on
 		a per-section basis.
 
-		CONFIG_CONSOLE_SCROLL_LINES
-
-		When the console need to be scrolled, this is the number of
-		lines to scroll by. It defaults to 1. Increasing this makes
-		the console jump but can help speed up operation when scrolling
-		is slow.
 
 		CONFIG_LCD_ROTATION
 
@@ -3360,11 +3338,6 @@ FIT uImage format:
 		CONFIG_SPL_INIT_MINIMAL
 		Arch init code should be built for a very small image
 
-		CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-		CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-		Address and partition on the MMC to load U-Boot from
-		when the MMC is being used in raw mode.
-
 		CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 		Partition on the MMC to load U-Boot from when the MMC is being
 		used in raw mode
@@ -3549,15 +3522,6 @@ Configuration Settings:
 - CONFIG_SYS_BAUDRATE_TABLE:
 		List of legal baudrate settings for this board.
 
-- CONFIG_SYS_CONSOLE_INFO_QUIET
-		Suppress display of console information at boot.
-
-- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-		Enable the call to overwrite_console().
-
-- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-		Enable overwrite of previous console environment settings.
-
 - CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
 		Begin and End addresses of the area used by the
 		simple memory test.