X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=452e5955023a04dca813ca4bb64bfdd19870c921;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=d6ff909e9a44d6ca8fe97244f197af17f719f4ed;hpb=90f0819a318b44d0c92611b7419d73781402476d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index d6ff909..452e595 100644
--- a/README
+++ b/README
@@ -293,33 +293,6 @@ board_init_r():
 
 	SPL-specific notes:
 	- stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and
-		CONFIG_SPL_STACK_R_ADDR points into SDRAM
-	- preloader_console_init() can be called here - typically this is
-		done by selecting CONFIG_SPL_BOARD_INIT and then supplying a
-		spl_board_init() function containing this call
-	- loads U-Boot or (in falcon mode) Linux
-
-
-Configuration Options:
-----------------------
-
-Configuration depends on the combination of board and CPU type; all
-such information is kept in a configuration file
-"include/configs/<board_name>.h".
-
-Example: For a TQM823L module, all configuration settings are in
-"include/configs/TQM823L.h".
-
-
-Many of the options are named exactly as the corresponding Linux
-kernel configuration options. The intention is to make it easier to
-build a config tool - later.
-
-- ARM Platform Bus Type(CCI):
-		CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which
-		provides full cache coherency between two clusters of multi-core
-		CPUs and I/O coherency for devices and I/O masters
-
 		CONFIG_SYS_FSL_HAS_CCI400
 
 		Defined For SoC that has cache coherent interconnect
@@ -493,12 +466,6 @@ The following options need to be configured:
 		Defines the SEC controller register space as Little Endian
 
 - MIPS CPU options:
-		CONFIG_SYS_INIT_SP_OFFSET
-
-		Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack
-		pointer. This is needed for the temporary stack before
-		relocation.
-
 		CONFIG_XWAY_SWAP_BYTES
 
 		Enable compilation of tools/xway-swap-bytes needed for Lantiq
@@ -1658,16 +1625,6 @@ The following options need to be configured:
 		CONFIG_SPL
 		Enable building of SPL globally.
 
-		CONFIG_SPL_RELOC_TEXT_BASE
-		Address to relocate to.  If unspecified, this is equal to
-		CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
-
-		CONFIG_SPL_BSS_START_ADDR
-		Link address for the BSS within the SPL binary.
-
-		CONFIG_SPL_STACK
-		Adress of the start of the stack SPL will use
-
 		CONFIG_SPL_PANIC_ON_RAW_IMAGE
 		When defined, SPL will panic() if the image it has
 		loaded does not have a signature.
@@ -1678,20 +1635,6 @@ The following options need to be configured:
 		consider that a completely unreadable NAND block is bad,
 		and thus should be skipped silently.
 
-		CONFIG_SPL_RELOC_STACK
-		Adress of the start of the stack SPL will use after
-		relocation.  If unspecified, this is equal to
-		CONFIG_SPL_STACK.
-
-		CONFIG_SYS_SPL_MALLOC_START
-		Starting address of the malloc pool used in SPL.
-		When this option is set the full malloc is used in SPL and
-		it is set up by spl_init() and before that, the simple malloc()
-		can be used if CONFIG_SYS_MALLOC_F is defined.
-
-		CONFIG_SYS_SPL_MALLOC_SIZE
-		The size of the malloc pool used in SPL.
-
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
@@ -1836,7 +1779,7 @@ Configuration Settings:
 - CONFIG_SYS_MALLOC_SIMPLE
 		Provides a simple and small malloc() and calloc() for those
 		boards which do not use the full malloc in SPL (which is
-		enabled with CONFIG_SYS_SPL_MALLOC_START).
+		enabled with CONFIG_SYS_SPL_MALLOC).
 
 - CONFIG_SYS_NONCACHED_MEMORY:
 		Size of non-cached memory area. This area of memory will be
@@ -2130,24 +2073,6 @@ Low Level (hardware related) configuration options:
 		U-Boot uses the following memory types:
 		- MPC8xx: IMMR (internal memory of the CPU)
 
-- CONFIG_SYS_GBL_DATA_OFFSET:
-
-		Offset of the initial data structure in the memory
-		area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually
-		CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial
-		data is located at the end of the available space
-		(sometimes written as (CONFIG_SYS_INIT_RAM_SIZE -
-		GENERATED_GBL_DATA_SIZE), and the initial stack is just
-		below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR +
-		CONFIG_SYS_GBL_DATA_OFFSET) downward.
-
-	Note:
-		On the MPC824X (or other systems that use the data
-		cache for initial memory) the address chosen for
-		CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must
-		point to an otherwise UNUSED address space between
-		the top of RAM and the start of the PCI space.
-
 - CONFIG_SYS_SCCR:	System Clock and reset Control Register (15-27)
 
 - CONFIG_SYS_OR_TIMING_SDRAM: