X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=README;h=0da641296b38840a08d68b1b2bfb00dd162f9f91;hb=9314cee6917444ab88bd4e758da7a30975120187;hp=b5e40862b9940da24b1474595a532fe6c6e43095;hpb=f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764;p=platform%2Fkernel%2Fu-boot.git

diff --git a/README b/README
index b5e4086..0da6412 100644
--- a/README
+++ b/README
@@ -1392,6 +1392,12 @@ The following options need to be configured:
 		If defined, then this indicates the I2C bus number for the DTT.
 		If not defined, then U-Boot assumes that DTT is on I2C bus 0.
 
+		CFG_I2C_DTT_ADDR:
+
+		If defined, specifies the I2C address of the DTT device.
+		If not defined, then U-Boot uses predefined value for
+		specified DTT device.
+
 		CONFIG_FSL_I2C
 
 		Define this option if you want to use Freescale's I2C driver in
@@ -2168,7 +2174,7 @@ source code will make it necessary to adapt <board>/u-boot.lds*
 accordingly!
 
 
-- CFG_ENV_IS_IN_NVRAM:
+- CONFIG_ENV_IS_IN_NVRAM:
 
 	Define this if you have some non-volatile memory device
 	(NVRAM, battery buffered SRAM) which you want to use for the
@@ -2193,7 +2199,7 @@ keep settings there always unmodified except somebody uses "saveenv"
 to save the current settings.
 
 
-- CFG_ENV_IS_IN_EEPROM:
+- CONFIG_ENV_IS_IN_EEPROM:
 
 	Use this if you have an EEPROM or similar serial access
 	device and a driver for it.
@@ -2236,7 +2242,7 @@ to save the current settings.
 	  The size in bytes of the EEPROM device.
 
 
-- CFG_ENV_IS_IN_DATAFLASH:
+- CONFIG_ENV_IS_IN_DATAFLASH:
 
 	Define this if you have a DataFlash memory device which you
 	want to use for the environment.
@@ -2249,7 +2255,7 @@ to save the current settings.
 	  environment area within the total memory of your DataFlash placed
 	  at the specified address.
 
-- CFG_ENV_IS_IN_NAND:
+- CONFIG_ENV_IS_IN_NAND:
 
 	Define this if you have a NAND device which you want to use
 	for the environment.