X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Makefile;h=dbc4b709b6a7315506937b59e22774adec4ca67a;hb=431047955b7f9addeda0a7c796618c102711247b;hp=12763ce0f971f704862fbca6ef893323343426df;hpb=3c47f2f4871c345c20b9d986b11fec550ef6cc9f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 12763ce..dbc4b70 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -46,12 +46,7 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-# Set shell to bash if possible, otherwise fall back to sh
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-	else if [ -x /bin/bash ]; then echo /bin/bash; \
-	else echo sh; fi; fi)
-
-export	HOSTARCH HOSTOS SHELL
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -188,6 +183,16 @@ endif
 # load other configuration
 include $(TOPDIR)/config.mk
 
+# Targets which don't build the source code
+NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+
+# Only do the generic board check when actually building, not configuring
+ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
+ifeq ($(findstring _config,$(MAKECMDGOALS)),)
+$(CHECK_GENERIC_BOARD)
+endif
+endif
+
 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
 # that (or fail if absent).  Otherwise, search for a linker script in a
 # standard location.
@@ -273,6 +278,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -314,7 +320,7 @@ endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
 LIBS-y += drivers/sound/libsound.o
-LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
+LIBS-y += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
@@ -331,7 +337,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
@@ -406,8 +412,10 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
@@ -485,12 +493,19 @@ $(obj)u-boot.dis:	$(obj)u-boot
 
 
 $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(or $(CONFIG_SPL_PAD_TO),0) \
-			-O binary $(obj)spl/u-boot-spl \
-			$(obj)spl/u-boot-spl-pad.bin
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+			-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
 		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+			$(OBJTREE)/u-boot-with-spl.imx
+
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+			$(OBJTREE)/u-boot-with-nand-spl.imx
+
 $(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
 		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
 		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
@@ -549,6 +564,18 @@ endif
 $(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
 
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
+			of=$(obj)u-boot-pad.img 2>/dev/null
+		dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
+			conv=notrunc 2>/dev/null
+		cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -781,23 +808,6 @@ lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
 #########################################################################
-## ARM1176 Systems
-#########################################################################
-smdk6400_noUSB_config	\
-smdk6400_config	:	unconfig
-	@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
-	@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then			\
-		echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-	else										\
-		echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-	fi
-	@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-#########################################################################
 #########################################################################
 
 clean:
@@ -855,6 +865,8 @@ clobber:	tidy
 	@rm -f $(obj)u-boot.kwb
 	@rm -f $(obj)u-boot.pbl
 	@rm -f $(obj)u-boot.imx
+	@rm -f $(obj)u-boot-with-spl.imx
+	@rm -f $(obj)u-boot-with-nand-spl.imx
 	@rm -f $(obj)u-boot.ubl
 	@rm -f $(obj)u-boot.ais
 	@rm -f $(obj)u-boot.dtb