X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Makefile;h=cf7b2b10bcbec5234987ed786d76692ba19f953a;hb=d771dd531a1aa73e5a1d36b5c08850fc5fa29747;hp=6869ac8f5475cd26d9780bb0e3d1909927d5bfa2;hpb=d24c1d0f4da3b081a4fedf7ae2a08790871f08d0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 6869ac8..cf7b2b1 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-VERSION = 2018
-PATCHLEVEL = 09
+VERSION = 2019
+PATCHLEVEL = 01
 SUBLEVEL =
 EXTRAVERSION =
 NAME =
@@ -443,7 +443,7 @@ defaultenv_h := include/generated/defaultenv_autogenerated.h
 
 no-dot-config-targets := clean clobber mrproper distclean \
 			 help %docs check% coccicheck \
-			 ubootversion backup tests
+			 ubootversion backup tests check qcheck
 
 config-targets := 0
 mixed-targets  := 0
@@ -534,7 +534,7 @@ include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	@# Otherwise, 'make silentoldconfig' would be invoked twice.
 	$(Q)touch include/config/auto.conf
 
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
 
 -include include/autoconf.mk
@@ -689,13 +689,12 @@ libs-y += drivers/dma/
 libs-y += drivers/gpio/
 libs-y += drivers/i2c/
 libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
 libs-y += drivers/mtd/onenand/
 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
 libs-y += drivers/net/
 libs-y += drivers/net/phy/
-libs-y += drivers/pci/
 libs-y += drivers/power/ \
 	drivers/power/domain/ \
 	drivers/power/fuel_gauge/ \
@@ -713,8 +712,8 @@ libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
@@ -725,8 +724,7 @@ libs-y += common/
 libs-y += env/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
 libs-$(CONFIG_UT_ENV) += test/env/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 
@@ -852,6 +850,8 @@ ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
 endif
 
+ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+
 # Add optional build target if defined in board/cpu/soc headers
 ifneq ($(CONFIG_BUILD_TARGET),)
 ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
@@ -893,7 +893,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -910,13 +910,92 @@ quiet_cmd_cfgcheck = CFGCHK  $2
 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
 		$(srctree)/scripts/config_whitelist.txt $(srctree)
 
-all:		$(ALL-y) cfg
+all:		$(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
-	@echo "===================== WARNING ======================"
-	@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
-	@echo "(possibly in a subsequent patch in your series)"
-	@echo "before sending patches to the mailing list."
-	@echo "===================================================="
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+	@echo >&2 "(possibly in a subsequent patch in your series)"
+	@echo >&2 "before sending patches to the mailing list."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_MMC),y)
+ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+	@echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+	@echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
+ifneq ($(CONFIG_DM_SCSI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
+	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+	@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+	@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+	@echo >&2 "be used for debugging purposes. Please use"
+	@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+	@echo >&2 "See doc/README.fdt-control for more info."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+	@echo >&2 "the board before v2019.04 for no dm conversion"
+	@echo >&2 "and v2019.07 for partially dm converted drivers."
+	@echo >&2 "Failure to update can lead to driver/board removal"
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+	@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
 endif
 	@# Check that this build does not use CONFIG options that we do not
 	@# know about unless they are in Kconfig. All the existing CONFIG
@@ -1048,9 +1127,11 @@ u-boot.ldr:	u-boot
 
 # binman
 # ---------------------------------------------------------------------------
+# Use 'make BINMAN_DEBUG=1' to enable debugging
 quiet_cmd_binman = BINMAN  $@
-cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \
-		-I . -I $(srctree)/board/$(BOARDDIR) $<
+cmd_binman = $(srctree)/tools/binman/binman -u -d u-boot.dtb -O . -m \
+		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+		$(if $(BINMAN_DEBUG),-D) $(BINMAN_$(@F)) $<
 
 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 
@@ -1074,7 +1155,13 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
 U_BOOT_ITS := u-boot.its
-$(U_BOOT_ITS): FORCE
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
+U_BOOT_ITS_DEPS += u-boot
+endif
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
 	$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
 	$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
 endif
@@ -1111,6 +1198,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
+	$(BOARD_SIZE_CHECK)
 
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
@@ -1136,6 +1224,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
+ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 
 lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
@@ -1155,6 +1244,7 @@ lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
 	$(call if_changed,cat)
 
 CLEAN_FILES += lpc32xx-*
+endif
 
 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_TPL_PAD_TO)
@@ -1164,6 +1254,11 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 SPL: spl/u-boot-spl.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
@@ -1354,6 +1449,26 @@ u-boot.elf: u-boot.bin
 	$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
 	$(call if_changed,u-boot-elf)
 
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
+	$(call if_changed,binman)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+	$(call if_changed,mkimage)
+endif
+
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
 
 # Rule to link u-boot
@@ -1441,7 +1556,7 @@ ifneq ($(KBUILD_SRC),)
 endif
 
 # prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
 
 prepare1: prepare2 $(version_h) $(timestamp_h) \
                    include/config/auto.conf
@@ -1521,7 +1636,7 @@ $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
 # ---------------------------------------------------------------------------
 quiet_cmd_cpp_lds = LDS     $@
 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
-		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
+		-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
 
 u-boot.lds: $(LDSCRIPT) prepare FORCE
 	$(call if_changed_dep,cpp_lds)
@@ -1695,6 +1810,11 @@ help:
 	@echo  'Configuration targets:'
 	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
 	@echo  ''
+	@echo  'Test targets:'
+	@echo  ''
+	@echo  '  check           - Run all automated tests that use sandbox'
+	@echo  '  qcheck          - Run quick automated tests that use sandbox'
+	@echo  ''
 	@echo  'Other generic targets:'
 	@echo  '  all		  - Build all necessary images depending on configuration'
 	@echo  '  tests		  - Build U-Boot for sandbox and run tests'
@@ -1733,9 +1853,12 @@ help:
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'
 
-tests:
+tests check:
 	$(srctree)/test/run
 
+qcheck:
+	$(srctree)/test/run quick
+
 # Documentation targets
 # ---------------------------------------------------------------------------
 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \