X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Makefile;h=cf7b2b10bcbec5234987ed786d76692ba19f953a;hb=d771dd531a1aa73e5a1d36b5c08850fc5fa29747;hp=4d22d752b0f38f4df879bc147b38419f58853137;hpb=a267699bea1f46a849e788f277e7166f6244918d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 4d22d75..cf7b2b1 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2019
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -534,7 +534,7 @@ include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	@# Otherwise, 'make silentoldconfig' would be invoked twice.
 	$(Q)touch include/config/auto.conf
 
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
 
 -include include/autoconf.mk
@@ -712,8 +712,8 @@ libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
@@ -893,7 +893,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -910,7 +910,7 @@ quiet_cmd_cfgcheck = CFGCHK  $2
 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
 		$(srctree)/scripts/config_whitelist.txt $(srctree)
 
-all:		$(ALL-y) cfg
+all:		$(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
 	@echo >&2 "===================== WARNING ======================"
 	@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
@@ -938,7 +938,8 @@ ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
 	@echo >&2 "===================================================="
 endif
 endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_DM_SCSI)$(CONFIG_MVSATA_IDE),y)
+ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
+ifneq ($(CONFIG_DM_SCSI),y)
 	@echo >&2 "===================== WARNING ======================"
 	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
 	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
@@ -946,6 +947,27 @@ ifeq ($(CONFIG_LIBATA)$(CONFIG_DM_SCSI)$(CONFIG_MVSATA_IDE),y)
 	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
 	@echo >&2 "===================================================="
 endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+	@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+	@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
 ifeq ($(CONFIG_OF_EMBED),y)
 	@echo >&2 "===================== WARNING ======================"
 	@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
@@ -954,6 +976,27 @@ ifeq ($(CONFIG_OF_EMBED),y)
 	@echo >&2 "See doc/README.fdt-control for more info."
 	@echo >&2 "===================================================="
 endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+	@echo >&2 "the board before v2019.04 for no dm conversion"
+	@echo >&2 "and v2019.07 for partially dm converted drivers."
+	@echo >&2 "Failure to update can lead to driver/board removal"
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+	@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
 	@# Check that this build does not use CONFIG options that we do not
 	@# know about unless they are in Kconfig. All the existing CONFIG
 	@# options are whitelisted, so new ones should not be added.
@@ -1112,6 +1155,9 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
 U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
 ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
 U_BOOT_ITS_DEPS += u-boot
 endif
@@ -1152,6 +1198,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
+	$(BOARD_SIZE_CHECK)
 
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
@@ -1207,6 +1254,11 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 SPL: spl/u-boot-spl.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
@@ -1504,7 +1556,7 @@ ifneq ($(KBUILD_SRC),)
 endif
 
 # prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
 
 prepare1: prepare2 $(version_h) $(timestamp_h) \
                    include/config/auto.conf