X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Makefile;h=9e820c415006e8735318c952fd082fda6693806e;hb=f877f2233dbcd7417c2f0babe6a849099b167f3c;hp=587a530ceeefbb073fea140a09aabc9f0dfab1ad;hpb=ac4aeb1735404d2d331bd018e8c709e17c7392ad;p=platform%2Fkernel%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 587a530..9e820c4 100644
--- a/Makefile
+++ b/Makefile
@@ -21,8 +21,8 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2008
-PATCHLEVEL = 10
+VERSION = 2009
+PATCHLEVEL = 01
 SUBLEVEL =
 EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
@@ -30,6 +30,7 @@ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
 endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
@@ -44,7 +45,12 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+export	HOSTARCH HOSTOS SHELL
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -191,7 +197,7 @@ include $(TOPDIR)/config.mk
 OBJS  = cpu/$(CPU)/start.o
 ifeq ($(CPU),i386)
 OBJS += cpu/$(CPU)/start16.o
-OBJS += cpu/$(CPU)/reset.o
+OBJS += cpu/$(CPU)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
@@ -221,6 +227,8 @@ LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -230,6 +238,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -259,7 +268,7 @@ LIBS += api/libapi.a
 LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -339,7 +348,7 @@ $(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 $(OBJS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):	depend $(obj)include/autoconf.mk
+$(LIBS):	depend $(obj)include/autoconf.mk $(SUBDIRS)
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):	depend $(LIBS) $(obj)include/autoconf.mk
@@ -351,13 +360,13 @@ $(SUBDIRS):	depend $(obj)include/autoconf.mk
 $(LDSCRIPT):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
@@ -366,10 +375,13 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 
 $(VERSION_FILE):
 		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
-		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
-		 ) > $@.tmp
+		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+		@date +'#define U_BOOT_TIME "%T"' >> $@
+
 gdbtools:
 		$(MAKE) -C tools/gdb all || exit 1
 
@@ -379,7 +391,7 @@ updater:
 env:
 		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 
-depend dep:	$(VERSION_FILE)
+depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE)
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 TAG_SUBDIRS += include
@@ -396,6 +408,7 @@ TAG_SUBDIRS += disk
 TAG_SUBDIRS += common
 TAG_SUBDIRS += drivers/bios_emulator
 TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
 TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
@@ -452,7 +465,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	set -e ; \
 	: Extract the config macros ; \
 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > $@
+		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -460,7 +474,7 @@ sinclude $(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
@@ -1250,14 +1264,11 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
+CPCI405_config		\
 CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
 	@mkdir -p $(obj)board/esd/cpci405
-	@echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
 
 CPCIISER4_config:	unconfig
@@ -2175,6 +2186,9 @@ TASREG_config :		unconfig
 ## MPC83xx Systems
 #########################################################################
 
+kmeter1_config: unconfig
+	@$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config \
 MPC8313ERDB_NAND_33_config \
@@ -2314,6 +2328,21 @@ MVBLM7_config: unconfig
 sbc8349_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
 
+SIMPC8313_LP_config \
+SIMPC8313_SP_config: unconfig
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)board/sheldon/simpc8313
+	@if [ "$(findstring _LP_,$@)" ] ; then \
+		$(XECHO) -n "...Large Page NAND..." ; \
+		echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _SP_,$@)" ] ; then \
+		$(XECHO) -n "...Small Page NAND..." ; \
+		echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
+	fi ;
+	@$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
 
@@ -2387,8 +2416,14 @@ MPC8555CDS_config:	unconfig
 MPC8568MDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
+MPC8572DS_36BIT_config \
 MPC8572DS_config:       unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _36BIT_,$@)" ] ; then \
+		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+		$(XECHO) "... enabling 36-bit physical addressing." ; \
+	fi
+	@$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
 
 PM854_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -2452,6 +2487,12 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
 	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
+XPEDITE5200_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
@@ -2459,8 +2500,14 @@ TQM8560_config:		unconfig
 MPC8610HPCD_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
 
+MPC8641HPCN_36BIT_config \
 MPC8641HPCN_config:    unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _36BIT_,$@)" ] ; then \
+		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+		$(XECHO) "... enabling 36-bit physical addressing." ; \
+	fi
+	@$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
@@ -2550,15 +2597,6 @@ shannon_config	:	unconfig
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
-at91sam9261ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
-
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
@@ -2578,11 +2616,90 @@ mp2usb_config	:	unconfig
 ## Atmel ARM926EJ-S Systems
 #########################################################################
 
+afeb9260_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
+
 at91cap9adk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
+at91sam9261ek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
+at91sam9263ek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
+at91sam9rlek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2596,7 +2713,7 @@ ap720t_config		\
 ap920t_config		\
 ap926ejs_config		\
 ap946es_config: unconfig
-	@board/integratorap/split_by_variant.sh $@
+	@board/armltd/integratorap/split_by_variant.sh $@
 
 integratorcp_config	\
 cp_config		\
@@ -2608,7 +2725,7 @@ cp966_config		\
 cp922_config		\
 cp922_XA10_config	\
 cp1026_config: unconfig
-	@board/integratorcp/split_by_variant.sh $@
+	@board/armltd/integratorcp/split_by_variant.sh $@
 
 davinci_dvevm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
@@ -2635,6 +2752,18 @@ mx1fs2_config	:	unconfig
 netstar_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t netstar
 
+nmdk8815_config \
+nmdk8815_onenand_config:	unconfig
+	@mkdir -p $(obj)include
+	@ > $(obj)include/config.h
+	@if [ "$(findstring _onenand, $@)" ] ; then \
+		echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+		$(XECHO) "... configured for OneNand Flash"; \
+	else \
+		$(XECHO) "... configured for Nand Flash"; \
+	fi
+	@$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik
+
 omap1510inn_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
 
@@ -2686,13 +2815,22 @@ scb9328_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
 
 smdk2400_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
 
 smdk2410_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
 
-SX1_config :		unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config:		unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+		$(XECHO) "... configured for stdout serial"; \
+	else \
+		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+		$(XECHO) "... configured for stdout usbtty"; \
+	fi;
+	@$(MKCONFIG) SX1 arm arm925t sx1
 
 # TRAB default configuration:	8 MB Flash, 32 MB RAM
 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
@@ -2738,7 +2876,7 @@ cm41xx_config	:	unconfig
 versatile_config	\
 versatileab_config	\
 versatilepb_config :	unconfig
-	@board/versatile/split_by_variant.sh $@
+	@board/armltd/versatile/split_by_variant.sh $@
 
 voiceblue_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
@@ -2776,6 +2914,25 @@ SMN42_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
 
 #########################################################################
+## ARM CORTEX Systems
+#########################################################################
+
+omap3_beagle_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
+
+omap3_overo_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+
+omap3_evm_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
+
+omap3_pandora_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+
+omap3_zoom1_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
+
+#########################################################################
 ## XScale Systems
 #########################################################################
 
@@ -2897,14 +3054,17 @@ smdk6400_config	:	unconfig
 #########################################################################
 ## AMD SC520 CDP
 #########################################################################
+eNET_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
+
 sc520_cdp_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
+	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
 
 sc520_spunk_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
 
 sc520_spunk_rel_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+	@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
 
 #========================================================================
 # MIPS
@@ -3077,21 +3237,15 @@ PCI5441_config : unconfig
 ## Microblaze
 #========================================================================
 
-ml401_config:	unconfig
+microblaze-generic_config:	unconfig
 	@mkdir -p $(obj)include
-	@echo "#define CONFIG_ML401 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
+	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
 
 suzaku_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
-xupv2p_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
 #========================================================================
 # Blackfin
 #========================================================================
@@ -3142,9 +3296,9 @@ mimc200_config		:	unconfig
 ## sh2 (Renesas SuperH)
 #########################################################################
 rsk7203_config: unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_RSK7203 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
+	@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################
 ## sh3 (Renesas SuperH)
@@ -3167,7 +3321,7 @@ ms7720se_config: unconfig
 MigoR_config :       unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
-	@./mkconfig -a $(@:_config=) sh sh4 MigoR renesas
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
 
 ms7750se_config: unconfig
 	@mkdir -p $(obj)include
@@ -3263,7 +3417,7 @@ clean:
 	@rm -f $(obj)include/bmp_logo.h
 	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
-	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
+	@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
 		-o -name '*.o'	-o -name '*.a'	\) -print \