X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Kconfig;h=1119b1971666795066d2f7ea620753ba823cbda8;hb=bb6b142fc16713bb83e471912e614ac01eec4584;hp=b879461b964233fcf97ce537d22fd08551c31f15;hpb=65994d049474394729d976273d7582552f1db332;p=platform%2Fkernel%2Fu-boot.git diff --git a/Kconfig b/Kconfig index b879461..1119b19 100644 --- a/Kconfig +++ b/Kconfig @@ -1,6 +1,7 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. +# see the file Documentation/kbuild/kconfig-language.txt in the +# Linux kernel source tree. # mainmenu "U-Boot $UBOOTVERSION Configuration" @@ -17,7 +18,7 @@ config LOCALVERSION string "Local version - append to U-Boot release" help Append an extra string to the end of your U-Boot version. - This will show up on your boot log, for example. + This will show up in your boot log, for example. The string you set here will be appended after the contents of any files with a filename matching localversion* in your object and source tree, in that order. Your total string can @@ -28,11 +29,11 @@ config LOCALVERSION_AUTO default y help This will try to automatically determine if the current tree is a - release tree by looking for git tags that belong to the current + release tree by looking for Git tags that belong to the current top of tree revision. A string of the format -gxxxxxxxx will be added to the localversion - if a git-based tree is found. The string generated by this will be + if a Git-based tree is found. The string generated by this will be appended after any matching localversion* files, and after the value set in CONFIG_LOCALVERSION. @@ -52,11 +53,28 @@ config CC_OPTIMIZE_FOR_SIZE This option is enabled by default for U-Boot. +config DISTRO_DEFAULTS + bool "Select defaults suitable for booting general purpose Linux distributions" + default y if ARCH_SUNXI + default n + select CMD_BOOTZ + select CMD_DHCP + select CMD_EXT2 + select CMD_EXT4 + select CMD_FAT + select CMD_FS_GENERIC + select CMD_MII + select CMD_PING + select HUSH_PARSER + help + Select this to enable various options and commands which are suitable + for building u-boot for booting general purpose Linux distributions. + config SYS_MALLOC_F bool "Enable malloc() pool before relocation" - default 0x400 + default y if DM help - Before relocation memory is very limited on many platforms. Still, + Before relocation, memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. @@ -66,18 +84,53 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x400 help - Before relocation memory is very limited on many platforms. Still, + Before relocation, memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. menuconfig EXPERT - bool "Configure standard U-Boot features (expert users)" - help - This option allows certain base U-Boot options and settings - to be disabled or tweaked. This is for specialized - environments which can tolerate a "non-standard" U-Boot. - Only use this if you really know what you are doing. + bool "Configure standard U-Boot features (expert users)" + default y + help + This option allows certain base U-Boot options and settings + to be disabled or tweaked. This is for specialized + environments which can tolerate a "non-standard" U-Boot. + Use this only if you really know what you are doing. + +if EXPERT + config SYS_MALLOC_CLEAR_ON_INIT + bool "Init with zeros the memory reserved for malloc (slow)" + default y + help + This setting is enabled by default. The reserved malloc + memory is initialized with zeros, so first malloc calls + will return the pointer to the zeroed memory. But this + slows the boot time. + + It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN + value, has more than few MiB, e.g. when uses bzip2 or bmp logo. + Then the boot time can be significantly reduced. + Warning: + When disabling this, please check if malloc calls, maybe + should be replaced by calloc - if one expects zeroed memory. + +config TOOLS_DEBUG + bool "Enable debug information for tools" + help + Enable generation of debug information for tools such as mkimage. + This can be used for debugging purposes. With debug information + it is possible to set breakpoints on particular lines, single-step + debug through the source code, etc. + +endif + +config PHYS_64BIT + bool "64bit physical address support" + help + Say Y here to support 64bit physical memory address. + This can be used not only for 64bit SoCs, but also for + large physical address extention on 32bit SoCs. endmenu # General setup @@ -96,6 +149,16 @@ config SPL help If you want to build SPL as well as the normal image, say Y. +config SPL_SYS_MALLOC_SIMPLE + bool + depends on SPL + prompt "Only use malloc_simple functions in the SPL" + help + Say Y here to only use the *_simple malloc functions from + malloc_simple.c, rather then using the versions from dlmalloc.c; + this will make the SPL binary smaller at the cost of more heap + usage as the *_simple malloc functions do not re-use free-ed mem. + config SPL_STACK_R depends on SPL bool "Enable SDRAM location for SPL stack" @@ -114,6 +177,26 @@ config SPL_STACK_R_ADDR Specify the address in SDRAM for the SPL stack. This will be set up before board_init_r() is called. +config SPL_STACK_R_MALLOC_SIMPLE_LEN + depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE + hex "Size of malloc_simple heap after switching to DRAM SPL stack" + default 0x100000 + help + Specify the amount of the stack to use as memory pool for + malloc_simple after switching the stack to DRAM. This may be set + to give board_init_r() a larger heap then the initial heap in + SRAM which is limited to SYS_MALLOC_F_LEN bytes. + +config SPL_SEPARATE_BSS + depends on SPL + bool "BSS section is in a different memory region from text" + help + Some platforms need a large BSS region in SPL and can provide this + because RAM is already set up. In this case BSS can be moved to RAM. + This option should then be enabled so that the correct device tree + location is used. Normally we put the device tree at the end of BSS + but with this option enabled, it goes at _image_binary_end. + config TPL bool depends on SPL && SUPPORT_TPL @@ -128,7 +211,16 @@ config FIT Flattened Image Tree. FIT is formally a FDT, which can include images of various types (kernel, FDT blob, ramdisk, etc.) in a single blob. To boot this new uImage structure, - pass the the address of the blob to the "bootm" command. + pass the address of the blob to the "bootm" command. + FIT is very flexible, supporting compression, multiple images, + multiple configurations, verification through hashing and also + verified boot (secure boot using RSA). This option enables that + feature. + +config SPL_FIT + bool "Support Flattened Image Tree within SPL" + depends on FIT + depends on SPL config FIT_VERBOSE bool "Display verbose messages on FIT boot" @@ -143,8 +235,68 @@ config FIT_SIGNATURE This option enables signature verification of FIT uImages, using a hash signed and verified using RSA. If CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive - hashing is available using hardware, RSA library will use it. - See doc/uImage.FIT/signature.txt for more details. + hashing is available using hardware, then then RSA library will use + it. See doc/uImage.FIT/signature.txt for more details. + + WARNING: When relying on signed FIT images with a required signature + check the legacy image format is disabled by default, so that + unsigned images cannot be loaded. If a board needs the legacy image + format support in this case, enable it using + CONFIG_IMAGE_FORMAT_LEGACY. + +config SPL_FIT_SIGNATURE + bool "Enable signature verification of FIT firmware within SPL" + depends on SPL_FIT + depends on SPL_DM + select SPL_RSA + +config FIT_BEST_MATCH + bool "Select the best match for the kernel device tree" + depends on FIT + help + When no configuration is explicitly selected, default to the + one whose fdt's compatibility field best matches that of + U-Boot itself. A match is considered "best" if it matches the + most specific compatibility entry of U-Boot's fdt's root node. + The order of entries in the configuration's fdt is ignored. + +config FIT_VERBOSE + bool "Show verbose messages when FIT images fails" + depends on FIT + help + Generally a system will have valid FIT images so debug messages + are a waste of code space. If you are debugging your images then + you can enable this option to get more verbose information about + failures. + +config OF_BOARD_SETUP + bool "Set up board-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_board_setup() before booting into + the Operating System. This function can set up various + board-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_SYSTEM_SETUP + bool "Set up system-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_system_setup() before booting into + the Operating System. This function can set up various + system-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_STDOUT_VIA_ALIAS + bool "Update the device-tree stdout alias from U-Boot" + depends on OF_LIBFDT + help + This uses U-Boot's serial alias from the aliases node to update + the device tree passed to the OS. The "linux,stdout-path" property + in the chosen node is set to point to the correct serial node. + This option currently references CONFIG_CONS_INDEX, which is + incorrect when used with device tree as this option does not + exist / should not be used. config SYS_EXTRA_OPTIONS string "Extra Options (DEPRECATED)" @@ -160,21 +312,59 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC + depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ + (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS + depends on !EFI_APP hex "Text Base" help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + depends on FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + +config SPL_FIT_IMAGE_POST_PROCESS + bool "Enable post-processing of FIT artifacts after loading by the SPL" + depends on SPL_LOAD_FIT && TI_SECURE_DEVICE + help + Allows doing any sort of manipulation to blobs after they got extracted + from the U-Boot FIT image like stripping off headers or modifying the + size of the blob, verification, authentication, decryption etc. in a + platform or board specific way. In order to use this feature a platform + or board-specific implementation of board_fit_image_post_process() must + be provided. Also, anything done during this post-processing step would + need to be comprehended in how the images were prepared before being + injected into the FIT creation (i.e. the blobs would have been pre- + processed before being added to the FIT image). + config SYS_CLK_FREQ - depends on ARC + depends on ARC || ARCH_SUNXI int "CPU clock frequency" help TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture +config ARCH_FIXUP_FDT + bool "Enable arch_fixup_fdt() call" + depends on ARM || MIPS + default y + help + Enable FDT memory map syncup before OS boot. This feature can be + used for booting OS with different memory setup where the part of + the memory location should be used for different purpose. + endmenu # Boot images source "common/Kconfig" +source "cmd/Kconfig" + source "dts/Kconfig" source "net/Kconfig"