X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=e567af39ee34dcfd73649d451c4555d395223a1f;hb=23cb21092eb9dcec9d3604b68d95192b79915890;hp=766087781ecd6a7ae52b2843cb58c22fc678a8fb;hpb=21fbd5809ad126b949206d78e0a0e07ec872ea11;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7660877..e567af3 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -564,6 +564,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
+		hvc<n>	Use the hypervisor console device <n>. This is for
+			both Xen and PowerPC hypervisors.
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance
@@ -757,6 +759,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
+			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
@@ -774,6 +777,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The VGA output is eventually overwritten by the real
 			console.
 
+			The xen output can only be used by Xen PV guests.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 
@@ -2262,6 +2267,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				This sorting is done to get a device
 				order compatible with older (<= 2.4) kernels.
 		nobfsort	Don't sort PCI devices into breadth-first order.
+		pcie_bus_tune_off	Disable PCIe MPS (Max Payload Size)
+				tuning and use the BIOS-configured MPS defaults.
+		pcie_bus_safe	Set every device's MPS to the largest value
+				supported by all devices below the root complex.
+		pcie_bus_perf	Set device MPS to the largest allowable MPS
+				based on its parent bus. Also set MRRS (Max
+				Read Request Size) to the largest supported
+				value (no larger than the MPS that the device
+				or bus can support) for best performance.
+		pcie_bus_peer2peer	Set every device's MPS to 128B, which
+				every device is guaranteed to support. This
+				configuration allows peer-to-peer DMA between
+				any pair of devices, possibly at the cost of
+				reduced performance.  This also guarantees
+				that hot-added devices will work.
 		cbiosize=nn[KMG]	The fixed amount of bus space which is
 				reserved for the CardBus bridge's IO window.
 				The default value is 256 bytes.
@@ -2283,6 +2303,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		hpiosize=nn[KMG]	The fixed amount of bus space which is
+				reserved for hotplug bridge's IO window.
+				Default size is 256 bytes.
+		hpmemsize=nn[KMG]	The fixed amount of bus space which is
+				reserved for hotplug bridge's memory window.
+				Default size is 2 megabytes.
 		realloc=	Enable/disable reallocating PCI bridge resources
 				if allocations done by BIOS are too small to
 				accommodate resources required by all child