X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=CHANGELOG;h=ff6eadb1fd0aedfbdf6e74cb8634500049fa9297;hb=4bfb63207765e9048668eb1fe17ac51b02662635;hp=067e90d3b5507144b70bd9e8f36912c45348b529;hpb=5a3dfef73240cd6b5044184e521351afdb20838f;p=platform%2Fkernel%2Fu-boot.git diff --git a/CHANGELOG b/CHANGELOG index 067e90d..ff6eadb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,167 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Update for SC520 board. + Patch by David Updegraff, 02 Dec 2005 + +* Fixed common.h spelling error. + Patch by Cory Tusar, 30 Nov 2005 + +* Fix typo. + Patch by Andreas Engel, 28 Nov 2005 + +* Fix fatload command on FAT32 formatted partitions. + Patch by Joachim Jaeger, 18 Nov 2005 + +* Fix drivers/dm9000.c when configured in 32 bit mode. + Patch by Eric Benard, 17 Nov 2005 + +* Cleanup debug code for yucca board. + +* MCC200: restrict addressable flash space to 32 MB + +* Add debug console on COM12 for MCC200 board + +* Fix control-c handing in CONFIG_CMDLINE_EDITING + Properly pass break code back from readline. + Patch by Roger Blofeld, 31 Jul 2006 + +* Add commandline history support to all AMCC eval boards + Patch by Stefan Roese, 07 Aug 2006 + +* Add Macronix MXLV320T flash support for AMCC Bamboo + Patch by Stefan Roese, 07 Aug 2006 + +* Change "mii info" to not print an error upon missing PHY at address + Patch by Stefan Roese, 07 Aug 2006 + +* Fix PCI-Express on PPC440SPe rev. A. + +* Fix preboot message on TQM85xx after switching to hush parser. + +* Adapt TQM85xx ramdisk address to Linux kernel memory map + +* Add initial support for PCI-Express on PPC440SPe (Yucca board). + +* Fix compiler warning for TRAB board. + Patch by Martin Krause, 07 Aug 2006 + +* Prevent USB commands from working when USB is stopped. + +* Add rudimentary handling of alternate settings of USB interfaces. + This is in order to fix issues with some USB sticks timing out + during initialization. Some code readability improvements. + +* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance + AMCC suggested to set the PMU bit to 0 for best performace on + the PPC440 DDR controller. + Please see doc/README.440-DDR-performance for details. + Patch by Stefan Roese, 28 Jul 2006 + +* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte + Please see doc/README.bamboo for details. + Patch by Stefan Roese, 27 Jul 2006 + +* Fix CONFIG_CMDLINE_EDITING implementation + Patch by Stefan Roese, 27 Jul 2006 + +* Fix preboot message on TQM5200 after switching to hush parser. + +* MCC200: set default configuration to low_boot DDR, + and support for configurable options high_boot and/or SDRAM. + +* Add support for 256 MB SDRAM on CPU87 + Patch by Josef Wagner, 25 Nov 2005 + +* Add configuration for cam5200 board (based on TQM5200S). + +* More code cleanup + +* Disabled kvme080 board in MAKEALL because of build problems. + +* Code cleanup + +* Update NetStar board + Patch by Ladislav Michl, 03 Nov 2005 + +* Make code better readable. + Patch by Ladislav Michl, 14 Sep 2005 + +* Enable initrd ATAG for xm250 board. + Patch by Josef Wagner, 05 Sep 2005 + +* Add readline cmdline-editing extension + Patch by JinHua Luo, 01 Sep 2005 + +* Add support for friendly-arm SBC-2410X board + Patch by JinHua Luo, 01 Sep 2005 + +* Fix multi-part image support on i386 platform. + Patch by David Updegraff, 19 Aug 2005 + +* Add support for KVME080 board + Patch by Sangmoon Kim, 18 Aug 2005 + +* Fix MIPS LE build problem + Patch by Matej Kupljen, 10 Aug 2005 + +* Check argument count in "mii" command. + Problem pointed out by Andrew Dyer, 13 Jun 2005 + +* Cleanup TQM5200 board configurations: + - make highboot configurations use environment at high end, too, + to avoid flash fragmentation + - always use redundand environment + - don't enable video code for modules without graphics controller + - provide useful (though different) mtdparts settings + - get rid of CONFIG_CS_AUTOCONF which was always set anyway + +* Extend mkconfig tool to print more useful target name + +* Add support for high-boot on TQM5200 and TQM5200S boards. + Hint: the CPLD on the TQM5200 must be programmed with a software + version supporting the high boot option! The new TQM5200S is + already supporting this option. On the TQM5200 this option will be + supported in configurations with MPC5200 rev B processors. + To actually "high boot", set jumper X30 on the STK52xx. + Patch by Martin Krause, 12 Jul 2006 + +* Add support for new TQM5200 revisions + - Support for TQM5200S (short version without graphic controller) + - Support for modules with 'N' type S29GL128N Spansion flashes + (requires changes to flash layout) + - Support for MPC5200B cpu (mostly support for second SDRAM bank) + Patch by Martin Krause, 07 Jul 2006 + +* Fix support for PS/2 keyboard on TQM85xx boards + The PS/2 keyobard driver for the TQM85xx modules only supports the + internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't + include a DUART, the TQM8560 modules can't be used with the PS/2 + keyboard controller on the STK85xx board. + The PS/2 keyboard driver should work with the modules TQM8540, + TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. + Make sure the PS/2 controller on the STK85xx is programmed. Jumper + settings: X66 1-2, 9-10; X61 2-3 + Patch by Martin Krause, 21 Jun 2006 + +* Adjust RTC century handling on STK52xx board to match Linux driver. + Patch by Martin Krause, 12 Jun 2006 + +* Adjust filenames for USB update images on TRAB board. + During an automatic update via USB stick, U-Boot searches for + images with the name "firmware.img" and "kernel.img". This names + are now changed to "firmw_01.img" and "kernl_01.img". This is done, + to prevent updates of new boards (with the new macronics "c" step + flashes) with old, incompatible firmware or kernel versions. + Patch by Martin Krause, 21 Jun 2006 + +* Bugfix in VFD routine on TRAB board. + Make sure upper lext pixel can be set to blue, too + (so far only red was possible). + Patch by Martin Krause, 15 Feb 2006 + +* Enable buffered flash writes for TB5200 board. + * Fix some bugs in TRAB board flash driver. - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT