X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fpci.h;h=508f7bca81c00f8625e91c9c4fe02cb1c7754cd3;hb=f643fb9f4c8fc5c5dceb8c2c2893447d18413d77;hp=68548b00d94864aaabd3efc323bb03e46a410146;hpb=9ef2835f26652092a61b0cb0551ef4f36be27946;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/pci.h b/include/pci.h index 68548b0..508f7bc 100644 --- a/include/pci.h +++ b/include/pci.h @@ -1,11 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH * Andreas Heppel * * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _PCI_H @@ -18,6 +17,7 @@ * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ +#define PCI_STD_HEADER_SIZEOF 64 #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ @@ -272,21 +272,6 @@ #define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ #define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ -/* From 440ep */ -#define PCI_ERREN 0x48 /* Error Enable */ -#define PCI_ERRSTS 0x49 /* Error Status */ -#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */ -#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */ -#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */ -#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */ -#define PCI_CAPID 0x58 /* Capability Identifier */ -#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */ -#define PCI_PMC 0x5A /* Power Management Capabilities */ -#define PCI_PMCSR 0x5C /* Power Management Control Status */ -#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */ -#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */ -#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */ - /* Header type 2 (CardBus bridges) */ #define PCI_CB_CAPABILITY_LIST 0x14 /* 0x15 reserved */ @@ -334,7 +319,21 @@ #define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ #define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ +#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */ +#define PCI_CAP_ID_DBG 0x0A /* Debug port */ +#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ +#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ +#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_ID_EA 0x14 /* PCI Enhanced Allocation */ +#define PCI_CAP_ID_MAX PCI_CAP_ID_EA #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 @@ -406,6 +405,7 @@ #define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ #define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ #define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */ #define PCI_MSI_RFU 3 /* Rest of capability flags */ #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ @@ -450,6 +450,10 @@ #define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */ #define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ #define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ +#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ +#define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM /* Include the ID list */ @@ -496,9 +500,20 @@ static inline void pci_set_region(struct pci_region *reg, typedef int pci_dev_t; #define PCI_BUS(d) (((d) >> 16) & 0xff) + +/* + * Please note the difference in DEVFN usage in U-Boot vs Linux. U-Boot + * uses DEVFN in bits 15-8 but Linux instead expects DEVFN in bits 7-0. + * Please see the Linux header include/uapi/linux/pci.h for more details. + * This is relevant for the following macros: + * PCI_DEV, PCI_FUNC, PCI_DEVFN + * The U-Boot macro PCI_DEV is equivalent to the Linux PCI_SLOT version with + * the remark from above (input d in bits 15-8 instead of 7-0. + */ #define PCI_DEV(d) (((d) >> 11) & 0x1f) #define PCI_FUNC(d) (((d) >> 8) & 0x7) #define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8) + #define PCI_MASK_BUS(bdf) ((bdf) & 0xffff) #define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn)) #define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f)) @@ -585,8 +600,6 @@ struct pci_controller { /* Used by auto config */ struct pci_region *pci_mem, *pci_io, *pci_prefetch; - /* Used by ppc405 autoconfig*/ - struct pci_region *pci_fb; #ifndef CONFIG_DM_PCI int current_busno; @@ -683,8 +696,21 @@ extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val); void pciauto_region_init(struct pci_region *res); void pciauto_region_align(struct pci_region *res, pci_size_t size); void pciauto_config_init(struct pci_controller *hose); + +/** + * pciauto_region_allocate() - Allocate resources from a PCI resource region + * + * Allocates @size bytes from the PCI resource @res. If @supports_64bit is + * false, the result will be guaranteed to fit in 32 bits. + * + * @res: PCI region to allocate from + * @size: Amount of bytes to allocate + * @bar: Returns the PCI bus address of the allocated resource + * @supports_64bit: Whether to allow allocations above the 32-bit boundary + * @return 0 if successful, -1 on failure + */ int pciauto_region_allocate(struct pci_region *res, pci_size_t size, - pci_addr_t *bar); + pci_addr_t *bar, bool supports_64bit); #if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose, @@ -700,6 +726,7 @@ extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags); extern void pci_register_hose(struct pci_controller* hose); extern struct pci_controller* pci_bus_to_hose(int bus); extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr); +extern struct pci_controller *pci_get_hose_head(void); extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev); extern int pci_hose_scan(struct pci_controller *hose); @@ -720,12 +747,6 @@ extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index); pci_dev_t pci_find_class(unsigned int find_class, int index); -extern int pci_hose_config_device(struct pci_controller *hose, - pci_dev_t dev, - unsigned long io, - pci_addr_t mem, - unsigned long command); - extern int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev, int cap); extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev, @@ -753,6 +774,10 @@ int pci_last_busno(void); extern void pci_mpc85xx_init (struct pci_controller *hose); #endif +#ifdef CONFIG_PCIE_IMX +extern void imx_pcie_remove(void); +#endif + #if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) /** * pci_write_bar32() - Write the address of a BAR including control bits @@ -809,7 +834,7 @@ struct udevice; * * Every device on a PCI bus has this per-child data. * - * It can be accessed using dev_get_parent_priv(dev) if dev->parent is a + * It can be accessed using dev_get_parent_platdata(dev) if dev->parent is a * PCI bus (i.e. UCLASS_PCI) * * @devfn: Encoded device and function index - see PCI_DEVFN() @@ -1007,6 +1032,7 @@ int dm_pci_hose_probe_bus(struct udevice *bus); * * @bus: Bus to read from * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size * @return 0 if OK, -ve on error @@ -1019,6 +1045,7 @@ int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, * * @bus: Bus to write from * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to write * @value: Value to write * @size: Access size * @return 0 if OK, -ve on error @@ -1027,6 +1054,21 @@ int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, unsigned long value, enum pci_size_t size); /** + * pci_bus_clrset_config32() - Update a configuration value for a device + * + * The register at @offset is updated to (oldvalue & ~clr) | set. + * + * @bus: Bus to access + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to update + * @clr: Bits to clear + * @set: Bits to set + * @return 0 if OK, -ve on error + */ +int pci_bus_clrset_config32(struct udevice *bus, pci_dev_t bdf, int offset, + u32 clr, u32 set); + +/** * Driver model PCI config access functions. Use these in preference to others * when you have a valid device */ @@ -1044,6 +1086,14 @@ int dm_pci_write_config8(struct udevice *dev, int offset, u8 value); int dm_pci_write_config16(struct udevice *dev, int offset, u16 value); int dm_pci_write_config32(struct udevice *dev, int offset, u32 value); +/** + * These permit convenient read/modify/write on PCI configuration. The + * register is updated to (oldvalue & ~clr) | set. + */ +int dm_pci_clrset_config8(struct udevice *dev, int offset, u32 clr, u32 set); +int dm_pci_clrset_config16(struct udevice *dev, int offset, u32 clr, u32 set); +int dm_pci_clrset_config32(struct udevice *dev, int offset, u32 clr, u32 set); + /* * The following functions provide access to the above without needing the * size parameter. We are trying to encourage the use of the 8/16/32-style @@ -1056,6 +1106,57 @@ int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep); int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep); int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep); +/** + * pci_generic_mmap_write_config() - Generic helper for writing to + * memory-mapped PCI configuration space. + * @bus: Pointer to the PCI bus + * @addr_f: Callback for calculating the config space address + * @bdf: Identifies the PCI device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. The callback function @addr_f is + * responsible for calculating the CPU address of the respective configuration + * space offset. + * + * Return: 0 on success, else -EINVAL + */ +int pci_generic_mmap_write_config( + struct udevice *bus, + int (*addr_f)(struct udevice *bus, pci_dev_t bdf, uint offset, void **addrp), + pci_dev_t bdf, + uint offset, + ulong value, + enum pci_size_t size); + +/** + * pci_generic_mmap_read_config() - Generic helper for reading from + * memory-mapped PCI configuration space. + * @bus: Pointer to the PCI bus + * @addr_f: Callback for calculating the config space address + * @bdf: Identifies the PCI device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. The callback function @addr_f is responsible for + * calculating the CPU address of the respective configuration space offset. + * + * Return: 0 on success, else -EINVAL + */ +int pci_generic_mmap_read_config( + struct udevice *bus, + int (*addr_f)(struct udevice *bus, pci_dev_t bdf, uint offset, void **addrp), + pci_dev_t bdf, + uint offset, + ulong *valuep, + enum pci_size_t size); + #ifdef CONFIG_DM_PCI_COMPAT /* Compatibility with old naming */ static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, @@ -1217,6 +1318,99 @@ pci_addr_t dm_pci_phys_to_bus(struct udevice *dev, phys_addr_t addr, */ void *dm_pci_map_bar(struct udevice *dev, int bar, int flags); +/** + * dm_pci_find_next_capability() - find a capability starting from an offset + * + * Tell if a device supports a given PCI capability. Returns the + * address of the requested capability structure within the device's + * PCI configuration space or 0 in case the device does not support it. + * + * Possible values for @cap: + * + * %PCI_CAP_ID_MSI Message Signalled Interrupts + * %PCI_CAP_ID_PCIX PCI-X + * %PCI_CAP_ID_EXP PCI Express + * %PCI_CAP_ID_MSIX MSI-X + * + * See PCI_CAP_ID_xxx for the complete capability ID codes. + * + * @dev: PCI device to query + * @start: offset to start from + * @cap: capability code + * @return: capability address or 0 if not supported + */ +int dm_pci_find_next_capability(struct udevice *dev, u8 start, int cap); + +/** + * dm_pci_find_capability() - find a capability + * + * Tell if a device supports a given PCI capability. Returns the + * address of the requested capability structure within the device's + * PCI configuration space or 0 in case the device does not support it. + * + * Possible values for @cap: + * + * %PCI_CAP_ID_MSI Message Signalled Interrupts + * %PCI_CAP_ID_PCIX PCI-X + * %PCI_CAP_ID_EXP PCI Express + * %PCI_CAP_ID_MSIX MSI-X + * + * See PCI_CAP_ID_xxx for the complete capability ID codes. + * + * @dev: PCI device to query + * @cap: capability code + * @return: capability address or 0 if not supported + */ +int dm_pci_find_capability(struct udevice *dev, int cap); + +/** + * dm_pci_find_next_ext_capability() - find an extended capability + * starting from an offset + * + * Tell if a device supports a given PCI express extended capability. + * Returns the address of the requested extended capability structure + * within the device's PCI configuration space or 0 in case the device + * does not support it. + * + * Possible values for @cap: + * + * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting + * %PCI_EXT_CAP_ID_VC Virtual Channel + * %PCI_EXT_CAP_ID_DSN Device Serial Number + * %PCI_EXT_CAP_ID_PWR Power Budgeting + * + * See PCI_EXT_CAP_ID_xxx for the complete extended capability ID codes. + * + * @dev: PCI device to query + * @start: offset to start from + * @cap: extended capability code + * @return: extended capability address or 0 if not supported + */ +int dm_pci_find_next_ext_capability(struct udevice *dev, int start, int cap); + +/** + * dm_pci_find_ext_capability() - find an extended capability + * + * Tell if a device supports a given PCI express extended capability. + * Returns the address of the requested extended capability structure + * within the device's PCI configuration space or 0 in case the device + * does not support it. + * + * Possible values for @cap: + * + * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting + * %PCI_EXT_CAP_ID_VC Virtual Channel + * %PCI_EXT_CAP_ID_DSN Device Serial Number + * %PCI_EXT_CAP_ID_PWR Power Budgeting + * + * See PCI_EXT_CAP_ID_xxx for the complete extended capability ID codes. + * + * @dev: PCI device to query + * @cap: extended capability code + * @return: extended capability address or 0 if not supported + */ +int dm_pci_find_ext_capability(struct udevice *dev, int cap); + #define dm_pci_virt_to_bus(dev, addr, flags) \ dm_pci_phys_to_bus(dev, (virt_to_phys(addr)), (flags)) #define dm_pci_bus_to_virt(dev, addr, flags, len, map_flags) \ @@ -1237,9 +1431,9 @@ void *dm_pci_map_bar(struct udevice *dev, int bar, int flags); #define dm_pci_mem_to_virt(dev, addr, len, map_flags) \ dm_pci_bus_to_virt((dev), (addr), PCI_REGION_MEM, (len), (map_flags)) #define dm_pci_virt_to_io(dev, addr) \ - dm_dm_pci_virt_to_bus((dev), (addr), PCI_REGION_IO) + dm_pci_virt_to_bus((dev), (addr), PCI_REGION_IO) #define dm_pci_io_to_virt(dev, addr, len, map_flags) \ - dm_dm_pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags)) + dm_pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags)) /** * dm_pci_find_device() - find a device by vendor/device ID @@ -1365,11 +1559,22 @@ struct dm_pci_emul_ops { * * @bus: PCI bus to search * @find_devfn: PCI device and function address (PCI_DEVFN()) + * @containerp: Returns container device if found * @emulp: Returns emulated device if found * @return 0 if found, -ENODEV if not found */ int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn, - struct udevice **emulp); + struct udevice **containerp, struct udevice **emulp); + +/** + * pci_get_devfn() - Extract the devfn from fdt_pci_addr of the device + * + * Get devfn from fdt_pci_addr of the specifified device + * + * @dev: PCI device + * @return devfn in bits 15...8 if found, -ENODEV if not found + */ +int pci_get_devfn(struct udevice *dev); #endif /* CONFIG_DM_PCI */