X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=ce5f77e3677447c460beb171c8dbe42cd2d83583;hb=e89f8aae3d67cd3d2d04cedd9735c5e5fd32b621;hp=1399dfd436bc8697e7ab0a3c7f973beb8aa5dcec;hpb=47738acceda5bae52b7c33ce912da6b52244c033;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 1399dfd..ce5f77e 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -20,8 +20,9 @@
 #define GICD_BASE	0xF9010000
 #define GICC_BASE	0xF9020000
 
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000
+#ifndef CONFIG_SYS_MEMTEST_SCRATCH
+# define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
+#endif
 
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS		2
@@ -42,9 +43,7 @@
 /* Serial setup */
 #define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8
-#define CONFIG_ZYNQ_SERIAL
 
-#define CONFIG_CONS_INDEX		0
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
@@ -53,35 +52,22 @@
 
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_MAY_FAIL
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_SUBNETMASK
-
-/* Diff from config_distro_defaults.h */
-#define CONFIG_SUPPORT_RAW_INITRD
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#endif
-#define CONFIG_AUTO_COMPLETE
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_SUPPORT_EMMC_BOOT
-# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
-#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
-# endif
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
-# define CONFIG_SYS_NAND_SELF_INIT
 # define CONFIG_SYS_NAND_ONFI_DETECTION
 # define CONFIG_MTD_DEVICE
 #endif
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
+#endif
+
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR		0x8000000
 
@@ -89,7 +75,6 @@
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 #define CONFIG_USB_CABLE_CHECK
-#define CONFIG_USB_FUNCTION_THOR
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
@@ -125,28 +110,19 @@
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		2048
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_PANIC_HANG
 #define CONFIG_SYS_MAXARGS		64
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHY_MARVELL
-# define CONFIG_PHY_NATSEMI
-# define CONFIG_PHY_TI
-# define CONFIG_PHY_VITESSE
-# define CONFIG_PHY_REALTEK
 # define PHY_ANEG_TIMEOUT       20000
 #endif
 
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
 #endif
 
 /* EEPROM */
@@ -159,8 +135,6 @@
 #endif
 
 #ifdef CONFIG_SATA_CEVA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
@@ -235,7 +209,14 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x0
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#define CONFIG_SPL_FRAMEWORK
+#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
+# define CONFIG_SPL_SPI_LOAD
+# define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
+# define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
+# define CONFIG_SYS_SPI_ARGS_SIZE	0xa0000
+
+# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x170000
+#endif
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
@@ -261,14 +242,14 @@
 # define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH_SUPPORT
 # define CONFIG_ENV_MAX_ENTRIES	10
+#endif
 
-# define CONFIG_SYS_SPL_MALLOC_START	0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
-#endif
 
 #define CONFIG_BOARD_EARLY_INIT_F