X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fwarp.h;h=865f2ac81c72a4bb8ac55d738f4de759cd7454c1;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=3b3bc2a7a5622f7abfa51ea2f54960951a5d8965;hpb=e51c1e8eced7f1661994bd3e1caf0ca032455b3e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/warp.h b/include/configs/warp.h
index 3b3bc2a..865f2ac 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -18,20 +18,14 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-
-/* Command definition */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
 #define CONFIG_HW_WATCHDOG
@@ -46,7 +40,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			SZ_512M
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -65,42 +58,35 @@
 /* VDD voltage 1.65 - 1.95 */
 #define CONFIG_SYS_SD_VOLTAGE		0x00000080
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG2 port enabled */
 #endif
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
-
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"FSL"
-
-#define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77696
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \