X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fwandboard.h;h=f05b55a0e29cdf0558bab7ce11a9a89771c2a1ba;hb=4d80051b63ff54f6b6f90fceb92cf87ab3401ecb;hp=d903c98245d562515e7706e9a8bb8711f176e024;hpb=3b1f681131149b5f62602f582a7e60b0185a2a49;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index d903c98..f05b55a 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -18,37 +18,20 @@
 #define MACH_TYPE_WANDBOARD		4412
 #define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
 /* Command definition */
-
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY		5
 
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-#define CONFIG_LOADADDR			0x12000000
-#define CONFIG_SYS_TEXT_BASE		0x17800000
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
@@ -58,19 +41,9 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* MMC Configuration */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -84,7 +57,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -220,10 +192,14 @@
 			"bootz; " \
 		"fi;\0" \
 	"findfdt="\
-		"if test $board_rev = MX6Q ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
-		"if test $board_rev = MX6DL ; then " \
+		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
+		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 
@@ -240,18 +216,6 @@
 		   "fi; " \
 	   "else run netboot; fi"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS	       16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -272,11 +236,4 @@
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 #endif			       /* __CONFIG_H * */