X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fudoo_neo.h;h=a4b8514c4e6eae8a93138050c2ff661560c45736;hb=72d81360aabd0485d3832d292bbea29c7c4554ef;hp=0357631664fc008a94b53d133e37a684fe99590a;hpb=0719b16f1990fcf911d81cb842508d1ff4580ff4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 0357631..a4b8514 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -1,78 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  * Copyright Jasbir Matharu
  * Copyright 2015 UDOO Team
  *
  * Configuration settings for the UDOO NEO board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MXC_UART
 
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
 /* Command definition */
 #define CONFIG_MXC_UART_BASE		UART1_BASE
-#define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC2*/
 
 /* Linux only */
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"console=ttymxc0,115200\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
+	"fdtfile=undefined\0" \
 	"fdt_addr=0x83000000\0" \
+	"fdt_addr_r=0x83000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcrootfstype=ext4\0" \
 	"findfdt="\
 		"if test $board_name = BASIC; then " \
-			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
 		"if test $board_name = BASICKS; then " \
-			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
 		"if test $board_name = FULL; then " \
-			"setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
 		"if test $board_name = EXTENDED; then " \
-			"setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
-		"if test $fdt_file = UNDEFINED; then " \
-			"echo WARNING: Could not determine dtb to use; fi; \0" \
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"ramdisk_addr_r=0x83000000\0" \
-	"ramdiskaddr=0x83000000\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+			"setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
+		"if test $fdtfile = UNDEFINED; then " \
+			"echo WARNING: Could not determine dtb to use; fi\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"ramdisk_addr_r=0x84000000\0" \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0)
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run distro_bootcmd"
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE		SZ_128K
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -83,11 +70,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* Environment organization */
-#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
-
-#define CONFIG_IMX_THERMAL
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
+#define PFUZE3000_I2C_BUS	0
 
 #endif				/* __CONFIG_H */