X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fudoo.h;h=8af5151c503d65ce6bd00e523b8cf8249693700d;hb=6cc04547cb3bbd3a3d78947f200acbae19e3c67f;hp=bf9106e239fe223800e825e1d073c1a7ac246337;hpb=c59afcff8a4ef087136e8a0ad7e2c587c32baf51;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index bf9106e..8af5151 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -12,37 +12,10 @@
 
 #include "imx6_spl.h"
 
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		4800
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/* Network support */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE                    ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR          6
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
 /* MMC Configuration */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc1,115200\0" \
@@ -52,7 +25,7 @@
 	"fdt_addr=0x18000000\0" \
 	"fdt_addr_r=0x18000000\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
+	"mmcdev=2\0" \
 	"mmcrootfstype=ext4\0" \
 	"findfdt="\
 		"if test ${board_rev} = MX6Q; then " \
@@ -61,18 +34,19 @@
 			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
 		"if test ${fdtfile} = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi\0" \
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"ramdisk_addr_r=0x13000000\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
+	func(MMC, mmc, 2) \
 	func(SATA, sata, 0) \
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -81,13 +55,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* Environment organization */
 
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
 #endif			       /* __CONFIG_H * */