X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Ftricorder.h;h=6f46675a1839bc2c561bcf2f4ea8b1fcd65aff41;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=c1c94954acf3551b452e1640d3601f7f827a4e0d;hpb=cbe7706ab8aab06c18edaa9b120371f9c8012728;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index c1c9495..6f46675 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -19,13 +19,11 @@
 /* High Level Configuration Options */
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP_COMMON
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
 #define CONFIG_ARM_ERRATA_621766
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_TRICORDER
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -39,12 +37,6 @@
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SILENT_CONSOLE
-
 /* Clock Defines */
 #define V_OSCK				26000000 /* Clock output from T2 */
 #define V_SCLK				(V_OSCK >> 1)
@@ -68,18 +60,6 @@
 #define CONFIG_OMAP3_GPIO_2		/* GPIO32..63 are in GPIO bank 2 */
 
 /* LED support */
-#define CONFIG_STATUS_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_CMD_LED			/* LED command */
-#define STATUS_LED_BIT			(1 << 0)
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT1			(1 << 1)
-#define STATUS_LED_STATE1		STATUS_LED_ON
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT2			(1 << 2)
-#define STATUS_LED_STATE2		STATUS_LED_ON
-#define STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 2)
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -96,9 +76,6 @@
 
 /* MMC */
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -321,10 +298,9 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \