X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Ftao3530.h;h=08134f4a1e442670e7475d97a6c21256e6fddad1;hb=19d1f1a2f3ccfbf85125150f7876ce22714b38bd;hp=ead8ea76e8e946b9800b97664efbb10044b4f2bc;hpb=8dda2e2f9e0976249f4a390e72f12533dbcb5ef4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index ead8ea7..08134f4 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -16,9 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-
-#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC			/* Has an SDRC controller */
 
@@ -63,17 +60,8 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2		/* GPIO32 ..63  is in GPIO bank 2 */
-#define CONFIG_OMAP3_GPIO_3		/* GPIO64 ..95  is in GPIO bank 3 */
-#define CONFIG_OMAP3_GPIO_4		/* GPIO96 ..127 is in GPIO bank 4 */
-#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
@@ -91,7 +79,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /*
@@ -168,7 +155,6 @@
 
 /* turn on command-line edit/hist/auto */
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
 #define CONFIG_AUTO_COMPLETE
 
 /* Print Buffer Size */
@@ -197,13 +183,6 @@
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
-
-/*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
@@ -223,7 +202,6 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
@@ -248,11 +226,8 @@
  */
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 
@@ -266,7 +241,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC