X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fsequoia.h;h=a913cbf7ca3e4acfb6f1f5742f2ed025fda58d08;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=623be7d39bcf1b9869f2c6f611ac5ab037281b09;hpb=9bea236b3402a262772b66d055ec6431cbd3ba87;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 623be7d..a913cbf 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -45,7 +45,6 @@
  * Define this if you want support for video console with radeon 9200 pci card
  * Also set CONFIG_SYS_TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case
  */
-#undef CONFIG_VIDEO
 
 #ifdef CONFIG_VIDEO
 /*
@@ -55,7 +54,6 @@
 #define CONFIG_4xx_DCACHE		/* enable dcache		*/
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
 
 /*
@@ -124,6 +122,7 @@
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
+#endif /* CONFIG_CMD_FLASH */
 
 #ifdef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
@@ -134,7 +133,6 @@
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
-#endif /* CONFIG_CMD_FLASH */
 
 /*
  * DDR SDRAM
@@ -151,7 +149,6 @@
  */
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
@@ -215,7 +212,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 #endif
 
-#define CONFIG_USB_STORAGE
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
@@ -231,13 +227,11 @@
  */
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DTT
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
 
 #ifdef CONFIG_440EPX
-#define CONFIG_CMD_USB
 #endif
 
 #ifndef CONFIG_RAINIER
@@ -270,17 +264,13 @@
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
-
 #define CONFIG_SUPPORT_VFAT
 
 /*
  * PCI stuff
  */
 /* General PCI */
-#define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
@@ -415,11 +405,8 @@
 #define CONFIG_ATI_RADEON_FB		/* use radeon framebuffer driver */
 #define VIDEO_IO_OFFSET			0xe8000000
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS		VIDEO_IO_OFFSET
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_CMD_BMP
 #endif