X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fsc_sps_1.h;h=16d2e2d22b40a232a8b0be78b8f1c39df9a0d485;hb=HEAD;hp=6642b3f8b48be38b2aa91398a8468269107991c1;hpb=9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
deleted file mode 100644
index 6642b3f..0000000
--- a/include/configs/sc_sps_1.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * SchulerControl GmbH, SC_SPS_1 module config
- *
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIGS_SC_SPS_1_H__
-#define __CONFIGS_SC_SPS_1_H__
-
-/* System configuration */
-#define CONFIG_MX28				/* i.MX28 SoC */
-#define MACH_TYPE_SC_SPS_1	4172
-#define CONFIG_MACH_TYPE	MACH_TYPE_SC_SPS_1
-
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-
-/* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
-#define PHYS_SDRAM_1			0x40000000	/* Base address */
-#define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-
-/* Environment */
-#define CONFIG_ENV_SIZE			(16 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
-
-/* Environment is in MMC */
-#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(256 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	1
-#define CONFIG_USB_STORAGE
-#endif
-
-/* Booting Linux */
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_BOOTARGS		"console=ttyAMA0,115200"
-#define CONFIG_BOOTCOMMAND	"bootm"
-#define CONFIG_LOADADDR		0x42000000
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"update_sd_firmware_filename=u-boot.sd\0"			\
-	"update_sd_firmware="		/* Update the SD firmware partition */ \
-		"if mmc rescan ; then "					\
-		"if tftp ${update_sd_firmware_filename} ; then "	\
-		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
-		"setexpr fw_sz ${fw_sz} + 1 ; "				\
-		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
-		"fi ; "							\
-		"fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_SC_SPS_1_H__ */