X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fpxm2.h;h=586a7edcbb527b88fe02d23ea9f39cb5737566ed;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=e8e0c7edd89eb97b670c51ab2770122cb72bde8d;hpb=d09ec7f81650425140776995fc9752189ddf7956;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index e8e0c7e..586a7ed 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * siemens pxm2
  * (C) Copyright 2013 Siemens Schweiz AG
@@ -7,26 +8,16 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_PXM2_H
 #define __CONFIG_PXM2_H
 
-#define CONFIG_SIEMENS_PXM2
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2
-
 #include "siemens-am33x-common.h"
 
 #define DDR_IOCTRL_VAL		0x18b
 #define DDR_PLL_FREQ		266
 
-#define BOARD_DFU_BUTTON_GPIO	59
-#define BOARD_LCD_POWER		111
-#define BOARD_BACK_LIGHT	112
-#define BOARD_TOUCH_POWER	57
-
 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 	"button_dfu0=59\0" \
 	"led0=117,0,1\0" \
@@ -34,18 +25,7 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */
 
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_FACTORYSET
-
-#ifndef CONFIG_SPL_BUILD
-
 /* Use common default */
-#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V1
 
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -80,53 +60,4 @@
 		"bootm ${kloadaddr}\0" \
 	""
 
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-	"if dfubutton; then " \
-		"run dfu_start; " \
-		"reset; " \
-	"fi; " \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmc_dev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run mmc_load_uimage; then " \
-			"run mmc_args;" \
-			"bootm ${kloadaddr};" \
-		"fi;" \
-	"fi;" \
-	"run nand_boot;" \
-	"reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
-#define PWM_TICKS	0x1388
-#define PWM_DUTY	0x200
-#endif
-
 #endif	/* ! __CONFIG_PXM2_H */