X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fpicosam9g45.h;h=bf817d7becda8427d6479f2b5e3adcf954168cf2;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=b2ba6fc58ae5c54148fa25c2b573c0a7f76548b9;hpb=4d339a9e8a758889de5da16b562aff5601bb3d8d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index b2ba6fc..bf817d7 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -30,10 +30,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -46,7 +42,6 @@
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
@@ -55,7 +50,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE		0x23E00000
 
@@ -63,7 +57,6 @@
 #define CONFIG_AT91_LED
 #define CONFIG_GREEN_LED	AT91_PIN_PD31	/* this is the user1 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -83,9 +76,6 @@
 
 /* No NOR flash */
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS	2
@@ -99,16 +89,13 @@
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -123,7 +110,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
@@ -160,7 +146,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -173,12 +158,6 @@
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 
 #ifdef CONFIG_SYS_USE_MMC
@@ -189,13 +168,8 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
 #define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK		132096000