X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fpicosam9g45.h;h=a14739f282cba0cc42aadbd1a8ccb385fe9bf766;hb=cbb89ed026e761b58a2568fea7b98135abcefe21;hp=36fe94dbc6b298bcafa8b6b6b8f3d0816d07ef39;hpb=38fed8abe7d2e7ba90deb352d0e7aed4364c5236;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 36fe94d..a14739f 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -30,7 +30,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -48,7 +47,6 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
 /* board specific(not enough SRAM) */
@@ -75,9 +73,6 @@
  * Command line configuration.
  */
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		ATMEL_BASE_CS1	/* on DDRSDRC1 */
@@ -92,15 +87,9 @@
 /* MMC */
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -108,11 +97,6 @@
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
@@ -128,8 +112,6 @@
  */
 #define FAT_ENV_DEVICE_AND_PART	"0"
 #define FAT_ENV_FILE		"uboot.env"
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
 #define CONFIG_ENV_SIZE		0x4000
 
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
@@ -139,8 +121,6 @@
 				"bootz 0x22000000 - 0x21000000"
 #endif
 
-#define CONFIG_BAUDRATE			115200
-
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE  \
@@ -170,7 +150,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
 #define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"