X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fomap3_logic.h;h=6a60ec355275d49b0cdb1ae6c869137e49750cba;hb=8f2fe0c86c56175dd7d5d0e3bc26bef41f224f03;hp=b2778cab0b47eec889a43e32993f7cb64da4475f;hpb=49c7303f0e526d46f8d16c5556963faf47c59d35;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index b2778ca..6a60ec3 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -30,18 +30,25 @@
 
 #include <configs/ti_omap3_common.h>
 
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
+ * order to allow for BCH8 to fit in.
+ */
+#undef CONFIG_SPL_TEXT_BASE
+#define CONFIG_SPL_TEXT_BASE		0x40200000
+
 /* Display CPU and Board information */
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
-
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_CMDLINE_EDITING		/* cmd line edit/history */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check keypress w/no delay */
 
 /* Hardware drivers */
 
@@ -58,15 +65,8 @@
 
 /* commands to include */
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_YAFFS2
 
 /* I2C */
 #define CONFIG_SYS_I2C_OMAP34XX
@@ -74,14 +74,25 @@
 #define EXPANSION_EEPROM_I2C_BUS	2	/* I2C Bus for AT24C64 */
 #define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID
 
+/* USB */
+#define CONFIG_USB_MUSB_OMAP2PLUS
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETHER_RNDIS
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
+
 /* TWL4030 */
 #define CONFIG_TWL4030_PWM
+#define CONFIG_TWL4030_USB
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
 
-#define CONFIG_CMD_UBI			/* UBI-formated MTD partition support */
 #define CONFIG_CMD_UBIFS		/* Read-only UBI volume operations */
 #define CONFIG_RBTREE			/* required by CONFIG_CMD_UBI */
 #define CONFIG_LZO			/* required by CONFIG_CMD_UBIFS */
@@ -128,7 +139,7 @@
 #define CONFIG_PREBOOT \
 	"echo ======================NOTICE============================;"\
 	"echo \"The u-boot environment is not set.\";"			\
-	"echo \"If using a display a valid display varible for your panel\";" \
+	"echo \"If using a display a valid display variable for your panel\";" \
 	"echo \"needs to be set.\";"					\
 	"echo \"Valid display options are:\";"				\
 	"echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\";"	\
@@ -155,6 +166,8 @@
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
+	"nandrootfstype=ubifs rootwait\0" \
 	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
@@ -196,6 +209,10 @@
 		"${optargs} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
+	"nandargs=run setconsole; setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
 	"fdtaddr=0x86000000\0" \
 	"loadfdtimage=mmc rescan; " \
 		"fatload mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
@@ -261,11 +278,10 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-
 /* SMSC922x Ethernet */
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_SMC911X
-#define CONFIG_SMC911X_16_BIT
+#define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE	0x08000000
 #endif /* (CONFIG_CMD_NET) */