X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fmcx.h;h=3f5fdab9a979b50b02ccb4cc16a7a25849c5ba46;hb=19d1f1a2f3ccfbf85125150f7876ce22714b38bd;hp=8387f1920d3a3822fc39927273da70eca106d496;hpb=ff62bdfbd5dd67d37901002a35b541f2c65ad78d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 8387f19..3f5fdab 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -12,18 +12,8 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP3_MCX		/* working with mcx */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
-#define MACH_TYPE_MCX			3656
+
 #define CONFIG_MACH_TYPE	MACH_TYPE_MCX
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
@@ -36,12 +26,6 @@
  */
 #define CONFIG_SYS_TEXT_BASE		0x80008000
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
@@ -85,40 +69,21 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 
 /* EHCI */
-#define CONFIG_USB_STORAGE
-#define CONFIG_OMAP3_GPIO_2
-#define CONFIG_OMAP3_GPIO_5
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define	CONFIG_USB_HOST_ETHER
 #define	CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
 
 /* commands to include */
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
@@ -290,7 +255,6 @@
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET		0x180000 /* environment starts here */
 
 /* Redundant Environment */
@@ -318,22 +282,12 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
@@ -345,7 +299,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
@@ -382,13 +335,8 @@
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_OMAP3
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #endif /* __CONFIG_H */