X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fkorat.h;h=c2e7118b1e504552301a5f725eaf4cfe5b2aeaf9;hb=880540decfb855e96bc14ac84ac7784669e4b382;hp=55485c209bdab1cf2ec06fcc71b573d6b0c67e91;hpb=553f09823cced77296825f615f00321d932bf914;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/korat.h b/include/configs/korat.h
index 55485c2..c2e7118 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -89,8 +89,7 @@
 #undef CONFIG_SYS_INIT_RAM_DCACHE
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
 #define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
-#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
@@ -103,7 +102,6 @@
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SERIAL_MULTI	1
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -157,11 +155,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
@@ -251,7 +249,6 @@
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx	*/
 					/*   buffers & descriptors	*/
-#define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_PHY1_ADDR	3
 
@@ -358,6 +355,7 @@
  */
 /* General PCI */
 #define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/