X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fimx6-engicam.h;h=56b3c7503eb6121dfcd7f2b63577c08da40810aa;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=e0bdb656b2676c202df63a7938fa2573965a7d64;hpb=d56b4b19744c314c26dc77585a7c7a9253d1487d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index e0bdb656..56b3c75 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
  *
  * Configuration settings for the Engicam i.MX6 SOM Starter Kits.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __IMX6_ENGICAM_CONFIG_H
@@ -57,6 +56,7 @@
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
+	"altbootcmd=run recoveryboot\0"\
 	"fitboot=echo Booting FIT image from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -98,7 +98,12 @@
 		"run ubiargs; " \
 		"nand read ${loadaddr} kernel 0x800000; " \
 		"nand read ${fdt_addr} dtb 0x100000; " \
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"recoveryboot=if test ${modeboot} = mmcboot; then " \
+			"run mmcboot; " \
+		"else " \
+			"run nandboot; " \
+		"fi\0"
 
 #define CONFIG_BOOTCOMMAND		"run $modeboot"
 
@@ -118,7 +123,6 @@
 #endif
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -130,11 +134,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
 					CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
 /* UART */
 #ifdef CONFIG_MXC_UART
 # ifdef CONFIG_MX6UL
@@ -159,15 +158,6 @@
 # define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
 
 /* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT			"nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT		"mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
-					"1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
 #endif
 
 /* Ethernet */
@@ -179,13 +169,24 @@
 #  define CONFIG_FEC_MXC_PHYADDR	0
 #  define CONFIG_FEC_XCV_TYPE		RMII
 # endif
+#endif
 
-# define CONFIG_MII
+/* Falcon Mode */
+#ifdef CONFIG_SPL_OS_BOOT
+# define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
+# define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
+# define CONFIG_CMD_SPL
+# define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
+# define CONFIG_CMD_SPL_WRITE_SIZE	(128 * SZ_1K)
+
+/* MMC support: args@1MB kernel@2MB */
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR		0x800   /* 1MB */
+# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS		(CONFIG_CMD_SPL_WRITE_SIZE / 512)
+# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1000  /* 2MB */
 #endif
 
 /* Framebuffer */
 #ifdef CONFIG_VIDEO_IPUV3
-# define CONFIG_IPUV3_CLK		260000000
 # define CONFIG_IMX_VIDEO_SKIP
 
 # define CONFIG_SPLASH_SCREEN
@@ -198,24 +199,13 @@
 
 /* SPL */
 #ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
+# ifdef CONFIG_ENV_IS_IN_NAND
 #  define CONFIG_SPL_NAND_SUPPORT
 # else
 #  define CONFIG_SPL_MMC_SUPPORT
 # endif
 
 # include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-#  if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
-#   define CONFIG_SYS_FSL_USDHC_NUM	2
-#  else
-#   define CONFIG_SYS_FSL_USDHC_NUM	1
-#  endif
-
-#  define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#  undef CONFIG_DM_GPIO
-#  undef CONFIG_DM_MMC
-# endif
 #endif
 
 #endif /* __IMX6_ENGICAM_CONFIG_H */