X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fgalaxy5200.h;h=d95144d589c37842c726f7d6e555258e58653735;hb=d98b0523cfaaedeecb263b15c121c0727b0d80b9;hp=e9a45699685a63e614df739ab5bafea4d27fe9f9;hpb=5b53b29bc2e82b80b669f1d2402068c60d7fecd0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index e9a4569..d95144d 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -42,8 +42,20 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333	/* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFFF00000	boot high (standard configuration)
+ * 0xFE000000	boot low
+ * 0x00100000	boot from RAM (for testing only) does not work
+ */
+#ifdef CONFIG_galaxy5200_LOWBOOT
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
+#endif
 
 /*
  * Serial console configuration
@@ -76,27 +88,33 @@
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
-#if (TEXT_BASE == 0xFE000000)		/* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)		/* Boot low */
 #define CONFIG_SYS_LOWBOOT 1
 #endif
 /* RAMBOOT will be defined automatically in memory section */
 
-#define MTDIDS_DEFAULT 		"nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT   	"mtdparts=physmap-flash.0:256k(ubootl)," \
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT	"mtdparts=physmap-flash.0:256k(ubootl)," \
 	"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow stopping of boot process */
 					/* even with bootdelay=0 */
-#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOT_RETRY_TIME 120	/* Reset if no command is entered  */
+#define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Welcome to U-Boot"\
+	"echo Welcome to U-Boot;"\
 	"echo"
 
+#define CONFIG_BOOTCOMMAND     "go ff300004 0; go ff300004 2 2;" \
+	"bootm ff040000 ff900000 fffc0000"
+#define CONFIG_BOOTARGS        "console=ttyPSC0,115200"
+#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"
+
 /*
  * IPB Bus clocking configuration.
  */
@@ -110,6 +128,7 @@
 #define CONFIG_SYS_I2C_MODULE 2		/* Select I2C module #1 or #2 */
 #define CONFIG_SYS_I2C_SPEED 100000	/* 100 kHz */
 #define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_INIT_MPC5XXX	/* Reset devices on i2c bus */
 
 /*
  * EEPROM CAT24WC32 configuration
@@ -134,7 +153,7 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xfe000000
 /*
- * The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
  * variable defined
  */
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
@@ -197,7 +216,7 @@
 						CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #	define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -209,7 +228,12 @@
 /* Chip Select configuration for NAND flash */
 #define CONFIG_SYS_CS1_START		0x20000000
 #define CONFIG_SYS_CS1_SIZE		0x90000
-#define CONFIG_SYS_CS1_CFG		0x0002d900
+#define CONFIG_SYS_CS1_CFG		0x00025b00
+
+/* Chip Select configuration for Epson S1D13513 */
+#define CONFIG_SYS_CS3_START		0x10000000
+#define CONFIG_SYS_CS3_SIZE		0x400000
+#define CONFIG_SYS_CS3_CFG		0xffff3d10
 
 /*
  * Ethernet configuration
@@ -361,6 +385,8 @@
 				 CONFIG_BOOTP_DNS2 | \
 				 CONFIG_BOOTP_SEND_HOSTNAME )
 
+#define CONFIG_VERSION_VARIABLE 1
+
 /*
  * Various low-level settings
  */
@@ -376,7 +402,7 @@
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CONFIG_SYS_RESET_ADDRESS 	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*
  * USB settings