X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fdevkit8000.h;h=4f43ba988227d0b067b482118473374e52197a35;hb=19210ae9838a867ce0243c41eafe928317c15b10;hp=83a8b5d59feec8f5f01117e270f914e0d339d120;hpb=a098cf41fdb2a6607c675f7fe4f3164617c9367e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 83a8b5d..4f43ba9 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -9,23 +9,7 @@
  *
  * Configuration settings for the DevKit8000 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -37,6 +21,7 @@
 #define CONFIG_OMAP3_DEVKIT8000	1	/* working with DevKit8000 */
 #define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
 #define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
 
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
@@ -105,12 +90,10 @@
 #define CONFIG_DOS_PARTITION		1
 
 /* I2C */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_SYS_I2C_BUS		0
-#define CONFIG_SYS_I2C_BUS_SELECT	1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
 #define CONFIG_TWL4030_POWER		1
@@ -274,7 +257,6 @@
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
@@ -295,8 +277,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-		                                         CONFIG_SYS_INIT_RAM_SIZE - \
-		                                         GENERATED_GBL_DATA_SIZE)
+							 CONFIG_SYS_INIT_RAM_SIZE - \
+							 GENERATED_GBL_DATA_SIZE)
 
 /* SRAM config */
 #define CONFIG_SYS_SRAM_START              0x40200000
@@ -345,6 +327,7 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
@@ -356,13 +339,20 @@
 
 /* SPL OS boot options */
 #define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_OS_BOOT_KEY	26
 
 #define CONFIG_CMD_SPL
 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400 /* 1024 byte */
 #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
 					0x400000)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
+
 #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
 
 #endif /* __CONFIG_H */