X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fcm-bf533.h;h=8bd499a7d2ce2eec36fa13275ffe1717d981e692;hb=HEAD;hp=dbc4a5b1002a22dcd8bda33279e51a9f4b576ca2;hpb=d6288664743cdd4824cb877ca424619c827c1256;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h
deleted file mode 100644
index dbc4a5b..0000000
--- a/include/configs/cm-bf533.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * U-boot - Configuration file for CM-BF533 board
- */
-
-#ifndef __CONFIG_CM_BF533_H__
-#define __CONFIG_CM_BF533_H__
-
-#include <asm/config-pre.h>
-
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			22
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			5
-
-/* Decrease core voltage */
-#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
-
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	9
-#define CONFIG_MEM_SIZE		32
-
-#define CONFIG_EBIU_SDRRC_VAL	((((CONFIG_SCLK_HZ / 1000) * 64) / 8192) - (7 + 2))
-#define CONFIG_EBIU_SDGCTL_VAL	(SCTLE | PSS | TWR_2 | TRCD_2 | TRP_2 | TRAS_7 | PASR_ALL | CL_3)
-
-#define CONFIG_EBIU_AMGCTL_VAL	(AMBEN_ALL)
-#define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
-#define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
-
-
-/*
- * Network Settings
- */
-#define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111	1
-#define CONFIG_SMC91111_BASE	0x20200300
-#define CONFIG_HOSTNAME		cm-bf533
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
-
-/*
- * Flash Settings
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	16
-
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	0x20000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_SIZE		0x10000
-
-
-/*
- * Misc Settings
- */
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_UART_CONSOLE	0
-#define CONFIG_BOOTCOMMAND	"run flashboot"
-#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
-
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif