X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FTK885D.h;h=f24b86e626e342da9cbad6896b7c09b6c6c1d093;hb=553f09823cced77296825f615f00321d932bf914;hp=14ff62c52f4228e6378b16d5b5fe7fcc387758b7;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 14ff62c..f24b86e 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -40,6 +40,8 @@
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
 #define CONFIG_TK885D		1	/* ...in a TK885D base board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
 #define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
@@ -48,7 +50,8 @@
 						/* 'cpuclk' variable with valid value)	*/
 
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-
+#define CONFIG_SYS_SMC_RXBUFLEN	128
+#define CONFIG_SYS_MAXIDLE	10
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -64,8 +67,8 @@
 #undef	CONFIG_BOOTARGS
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	"ethprime=FEC ETHERNET\0"					\
-	"ethact=FEC ETHERNET\0"						\
+	"ethprime=FEC\0"						\
+	"ethact=FEC\0"							\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
@@ -218,9 +221,9 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
 #define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -483,14 +486,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Network configuration
  */
 #define CONFIG_FEC_ENET			/* enable ethernet on FEC */
@@ -513,6 +508,11 @@
 #define CONFIG_MII_INIT	1
 
 #define CONFIG_NET_RETRY_COUNT	3
-#define CONFIG_ETHPRIME		"FEC ETHERNET"
+#define CONFIG_ETHPRIME		"FEC"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
 
 #endif	/* __CONFIG_H */