X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FNETTA.h;h=db22ba3f2d9109d282c172ab4c9ca275ecc49f09;hb=d98b0523cfaaedeecb263b15c121c0727b0d80b9;hp=63810b3305fcef82750a903cd38a317abb142cf1;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 63810b3..db22ba3 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -37,6 +37,8 @@
 #define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
 #define CONFIG_NETTA		1	/* ...on a NetTA board		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0x40000000
+
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -134,7 +136,6 @@
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCMCIA
 #define CONFIG_CMD_PING
@@ -488,14 +489,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /***********************************************************************************************************
@@ -616,106 +609,6 @@
 #define ER_BASE		0xF1020000
 #define DUMMY_BASE	0xF1FF0000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE			NAND_BASE
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-/* #define NAND_NO_RB */
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-#define NAND_MAX_CHIPS		1
-
-/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
-	} while(0)
-
-#ifndef NAND_NO_RB
-#define NAND_WAIT_READY(nand) \
-	do { \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
-			WATCHDOG_RESET(); \
-		} \
-	} while (0)
-#else
-#define NAND_WAIT_READY(nand) udelay(12)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
-#define CONFIG_JFFS2_NAND	1			/* jffs2 on nand support */
-#define NAND_CACHE_PAGES	16			/* size of nand cache in 512 bytes pages */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_SIZE		0x00100000
-#define CONFIG_JFFS2_PART_OFFSET	0x00200000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_JFFS2_CMDLINE
-#define MTDIDS_DEFAULT		"nand0=netta-nand"
-#define MTDPARTS_DEFAULT	"mtdparts=netta-nand:1m@2m(jffs2)"
-*/
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
@@ -775,7 +668,7 @@
 #define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta */
 #define CONFIG_CDP_PORT_ID		"eth%d"
 #define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot 1.0" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_VERSION		"u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
 #define CONFIG_CDP_PLATFORM		"Intracom NetTA"
 #define CONFIG_CDP_TRIGGER		0x20020001
 #define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */