X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FMPC837XERDB.h;h=d69d25e4018029cd8519a48695de6c0626e58d03;hb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;hp=0205c99399a07266e8879b291b824f8a359cc2d6;hpb=cd21a458da20f62807fedbed86b65f2d59d6b611;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 0205c99..d69d25e 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -34,6 +34,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
+#define CONFIG_HWCONFIG
 
 /*
  * On-board devices
@@ -48,8 +49,7 @@
 #define CONFIG_83XX_PCICLK	66666667 /* in HZ */
 #else
 #define CONFIG_83XX_CLKIN	66666667 /* in Hz */
-#define CONFIG_83XX_GENERIC_PCI	1
-#define CONFIG_83XX_GENERIC_PCIE	1
+#define CONFIG_PCIE
 #endif
 
 #ifndef CONFIG_SYS_CLK_FREQ
@@ -190,8 +190,8 @@
 				/* 0x3937d322 */
 #define CONFIG_SYS_DDR_TIMING_2	0x02984cc8
 
-#define CONFIG_SYS_DDR_INTERVAL	((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
-				| (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+#define CONFIG_SYS_DDR_INTERVAL	((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \
+				| (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 				/* 0x06090100 */
 
 #if defined(CONFIG_DDR_2T_TIMING)
@@ -205,7 +205,7 @@
 				/* 0x43000000 */
 #endif
 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE		((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+#define CONFIG_SYS_DDR_MODE		((0x0406 << SDRAM_MODE_ESD_SHIFT) \
 				| (0x0442 << SDRAM_MODE_SD_SHIFT))
 				/* 0x04400442 */ /* DDR400 */
 #define CONFIG_SYS_DDR_MODE2		0x00000000
@@ -220,7 +220,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -243,8 +243,10 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_FSL_ELBC		1
 
 /*
  * FLASH on the Local Bus
@@ -314,7 +316,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -507,9 +508,22 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -530,16 +544,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT		0x000000000
-#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
+				 HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2		HID2_HBE
 
 /*
@@ -630,20 +645,8 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifdef CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR		00:04:9f:ef:04:01
-#endif
-
-#ifdef CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:04:9f:ef:04:02
-#endif
-
 #define CONFIG_HAS_FSL_DR_USB
 
-#define CONFIG_IPADDR		10.0.0.2
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_GATEWAYIP	10.0.0.1
-#define CONFIG_NETMASK		255.0.0.0
 #define CONFIG_NETDEV		eth1
 
 #define CONFIG_HOSTNAME		mpc837x_rdb
@@ -653,7 +656,7 @@
 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
 #define CONFIG_FDTFILE		mpc8379_rdb.dtb
 
-#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		800000	/* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
@@ -664,12 +667,12 @@
 	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
 	"tftpflash=tftp $loadaddr $uboot;"				\
-		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
-	"fdtaddr=400000\0"						\
+		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
+	"fdtaddr=780000\0"						\
 	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
 	"ramdiskaddr=1000000\0"						\
 	"ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"			\